Black, front mudguard made of stainless steel for your Puch X30 NS, NL, NG-2AH, N-2AH, Puch X30-A, Puch Sprinter and Puch Supermaxi LG1 / LG2 moped / moped.
Since the front mudguard is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury. Furthermore, it is still possible to use an edge protector or splash guard flap. Corresponding holes must still be drilled if required.
All original holes are provided for mounting the side and lower mudguard struts.
To mount cable guides, holes are also already incorporated on both sides of the mudguard.
Note: These are B-grade goods. Unfortunately, the mudguards were insufficiently protected during transportation. Therefore, scratches may be present. The black color should therefore be regarded as a primer rather than a final coat of paint. The folded ends may also have been finished a little more beautifully.
Further parts for your wheel fairing, such as paint polish or fastening material, can be found in the accessories section.
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | varnished |
| Wheel size | 17 " |
| Color | black |
| Folding the ends | closed folded |
| Shape of the mudguard | round |
| Total length over ends | 560 mm |
| Scope | 700 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 180 mm |
| Mounting type | Nuts & bolts |
| Puch |
Ratings
Accessories & related products
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Supermaxi LG1
Manufacturer: swiing® revival parts · Color: Chrome · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Mounting type: Nuts & bolts · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 "
EUR 71.60
swiing® revival 17" front fender "Retro" Inox black | Puch X30 NS, NL, NG-2AH, N-2AH, LG1/LG2
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Wheel size: 17 " · Folding the ends: closed folded · Color: black · Shape of the mudguard: round · Mounting type: Nuts & bolts · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm
EUR 71.60
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Mounting type: Nuts & bolts · Distance mudguard - center hole: 300 mm · Total length: 305 mm · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Wheel size: 17 "
EUR 17.80
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Outer width: 130 mm · Material: Steel · Surface: varnished · Color: black · Mounting type: Nuts & bolts · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Total length: 270 mm · Ø mounting hole: 5.9 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.3 mm · Hole spacing: 35 mm · Wheel size: 17 " · Wide intake: 115 mm
EUR 23.80
Explore categories from Mudguard
Moped fans also bought
GPO chain tensioner | Puch Maxi S
Total length: 175 mm · Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
EUR 11.80
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Ø inside: 94 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm
EUR 23.80
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 2.85
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.40
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Hole spacing: 410 mm · Ø mounting hole: 8.1 mm · Material: Steel · Surface: varnished · Color: black · Total length: 420 mm · Width: 170 mm · Height: 35 mm · Mounting type: Screws · Ø outside: 12.5 mm · Number of fixing points: 4 pcs
EUR 35.70
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Mounting type: Nuts & bolts · Distance mudguard - center hole: 300 mm · Total length: 305 mm · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Wheel size: 17 "
EUR 17.80
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Outer width: 130 mm · Material: Steel · Surface: varnished · Color: black · Mounting type: Nuts & bolts · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Total length: 270 mm · Ø mounting hole: 5.9 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.3 mm · Hole spacing: 35 mm · Wheel size: 17 " · Wide intake: 115 mm
EUR 23.80
Collection only possible with online purchase and appointment.
