Extravagant custom license plate holder suitable for your Puch moped / moped with Swiss number plate.
The CNC-milled, black anodized number plate holder with «Puch» laser engraving is designed so that the number plate can simply be inserted and screwed to the number holder using the screws supplied.
Alternative number holders and various mounting pins for attaching the license plate to the wheel axle or to the bumper bolt can be found in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
| Manufacturer | 66HEROES |
| Hole spacing | 50 mm |
| Material | Aluminum |
| Surface | anodized |
| Color | black |
| Thread type | M4x0.7 (standard thread) |
| Total length | 153 mm |
| Width | 111 mm |
| Height | 8 mm |
| Ø mounting hole | 5.2 mm |
| Mounting type | Nuts & bolts |
| Thread length | 12 mm |
| Number of fixing points | 2 pcs |
| Puch |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.00
EUR 2’600.00/l
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Number of fixing points: 1 pcs · Thread length: 10 mm · Total length: 110 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Screwed clamp · Width: 58 mm · Height: 29 mm
EUR 29.50
66HEROES Custom number frame "mofakult" black (CH version)
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Color: black · Mounting type: Nuts & bolts · Thread type: M4x0.7 (standard thread) · Total length: 7 mm · Number of fixing points: 2 pcs · Hole spacing: 50 mm · Width: 111 mm · Height: 153 mm
EUR 59.10
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.70
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Surface: blank · Bearing type: Plain bearing · Ø inside: 16.2 mm · Ø outside: 20.2 mm · Total length: 19 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 2.95
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 15.30
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Number of fixing points: 1 pcs · Thread length: 10 mm · Total length: 110 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Screwed clamp · Width: 58 mm · Height: 29 mm
EUR 29.50
Collection only possible with online purchase and appointment.
