High-quality 6-volt bulb set including voltage regulator and Y-cable, suitable for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds.
The set includes a 6V Leonelli voltage limiter, a single-pole 6 Volt P26s front light and a BA9s or E10 rear light with 6 V.
Thanks to the included transition cable, you don't have to cut up your original wiring harness or patch it up with solder terminals and other connectors. Simply connect the red cable lugs to the wiring harness and the black flat connector to the controller contact. To insulate the connection point, slide the heat-shrink tubing over the connection and shrink it together with a lighter or hot air gun.
Manufacturer: Leonelli · Material: Plastic, Aluminum · Tension: 6 V · Type of current: Alternating current (AC) · Performance: 50 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
Number of cables: 2 pcs · Cable cross-section [mm²]: 1.5 mm² · Cable bifurcation to motor: 150 mm · Manufacturer: GPO
| Manufacturer | Leonelli, swiing® revival parts |
| Test mark | none |
| Tension | 6 V |
| Color | white |
| Bulb holder | BA9s, E10, P26s |
| Ø base | 9 mm, 9.5 mm, 26 mm |
| Performance | 3 W, 4 W, 6 W, 15 W, 20 W |
| Ø Lamp head | 9 mm, 11 mm, 25 mm |
| LED | No |
| Total length | 23 mm, 24 mm, 44 mm |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
12V bulb set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Leonelli · Manufacturer: swiing® revival parts · Color: white · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Test mark: none · Tension: 12 V · Performance: 3 W · Performance: 5 W · Performance: 15 W · Performance: 20 W · Ø Lamp head: 9 mm · Ø Lamp head: 11 mm · Total length: 23 mm · Total length: 24 mm · Ø Lamp head: 25 mm · Total length: 44 mm · LED: No
EUR 50.70
12V LED set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Leonelli · Color: white · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Test mark: none · Tension: 12 V · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · Total length: 22 mm · Total length: 27 mm · Total length: 35 mm · LED: Yes
EUR 70.80
6V bulb set with GPO voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Manufacturer: swiing® revival parts · Color: white · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Test mark: none · Tension: 6 V · Performance: 3 W · Performance: 4 W · Performance: 6 W · Performance: 15 W · Performance: 20 W · Ø Lamp head: 9 mm · Ø Lamp head: 11 mm · Total length: 23 mm · Total length: 24 mm · Ø Lamp head: 25 mm · Total length: 44 mm · LED: No
EUR 38.90
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Manufacturer: Magura · Thread type: M4x0.7 (standard thread) · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm
EUR 2.35
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Test mark: none · Material: Plastic · Color: black · Color: red · Bulb holder: BA9s · Depth: 43 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Width: 130 mm · Height: 58 mm
EUR 22.30
Collection only possible with online purchase and appointment.
