1/2" x 5/16" chain, which has 144 links and is suitable for driving various mopeds, small motorcycles and motorcycles.
This roller chain was also used on small motorcycles such as the Kreidler Florett, Zündapp KS etc.
The chain lock with spring lock, also known as a clip lock, is included in the scope of delivery.
Pitch: 1/2x5/16 (428 wider than standard moped chains)
Finish: HS (heavy-duty finish with reinforced plates and enlarged link surfaces)
Length: 144 links
Color: gold
Since the drive chain must be shortened in any case, we recommend that you also order a chain breaker, as listed under accessories.
Branded product of the manufacturer «A Motorcycle Chain» (KMC).
| Chain type | 428H |
| Manufacturer | A-Chain |
| Color | gold |
| Material | Steel |
| Surface | varnished |
| Number of chain links | 144 pcs |
| Chain pitch | 1/2" x 5/16" |
| Rolling circumference | 1829 mm |
| Chain lock type | Spring lock |
Ratings
Accessories & related products
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Cable length: 2200 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder
EUR 2.85
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Total length: 6 mm
EUR 2.40
GPO light switch with wiring harness base chrome version
Cable length: 970 mm · Manufacturer: GPO · Material: Plastic · Number of cables: 5 pcs · Surface: chrome-plated · Color: Chrome · Housing material: Steel · Substructure material: Steel · Total length: 50 mm · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Ø Handlebars: 22 mm · Width: 30 mm · Number of positions: 3 pcs · Height: 25 mm · Cable bifurcation to motor: 970 mm · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm
EUR 20.20
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 51.30
swiing® ingenious gasket outlet 28 mm graphite
Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Ø screw holder: 6.6 mm · Place of use: Exhaust · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8.85
swiing® ingenious 44 mm cylinder kit CH12 camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 21 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
EUR 119.30
Not in stock
Collection only possible with online purchase and appointment.
