Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
Carousel Image 5
logo_addy

For: Puch

35371

ADDY exhaust S100F

Home
| Motor
| Exhaust system
| Complete systems
EUR 290.90

Incl. 21% VAT.

Special, hand-made S100F racing exhaust system for your Puch moped / moped with E50 engine and straight exhaust outlet.

This racing exhaust is ideal for cross or racing use and generates a strong power band, especially in the mid to upper speed range. In contrast to the H100A and H100+, this snail muffler allows even more flow and provides even more torque thanks to the 25 mm passage at the cylinder connection.

Note: We recommend using nuts with a height of 18 mm for fastening to the exhaust.

Other complete racing systems as well as engine cases, cylinder kits and the nuts mentioned can be found in the accessories section.

Quality product from the ADDY by Schöb Engineering brand.

Details

ManufacturerADDY
MaterialSteel
Surfacevarnished
Colorblack
Total length840 mm
Ø Silencer55 mm
Mounting typeStud bolts & nuts, Nuts & bolts
Flame tube attachmentFlange
Exhaust typeSnail
Number of fixing points3 pcs

Suitable for the following models

Puch

E50

Accessories & related products

Nut M6 extra high galvanized

Universal

12256

Nut M6 extra high galvanized

Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 3D · Height: 18 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Width across flats SW: 10 mm · Area of application: Standard

EUR 2.20

Parmakit 45 mm cylinder kit 70 ccm large ribs | Puch
undefined

For: Puch

18067

Parmakit 45 mm cylinder kit 70 ccm large ribs | Puch

Nominal diameter: 45 mm · Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning

EUR 279.30

Hot Hot
swiing 44 mm cylinder kit CH12 camouflaged | Puch
undefined
angle-right

For: Puch

24300

swiing 44 mm cylinder kit CH12 camouflaged | Puch

Manufacturer: swiing · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Displacement: 65 ccm · Number of fixing points: 4 pcs · Nominal diameter: 44 mm · Area of application: Tuning · Outlet type: straight

EUR 116.30

Set
Metrakit 43.5 mm cylinder kit (65 cc - camouflaged) | Puch
undefined
angle-right

For: Puch

28688

Metrakit 43.5 mm cylinder kit (65 cc - camouflaged) | Puch

Manufacturer: Barikite · Manufacturer: Metracite · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 43.5 mm · Camouflaged: Yes · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread)

EUR 157.10

ADDY GME engine housing "der.pruefstand" Edition | Puch E50
undefined

For: Puch

35283

ADDY GME engine housing "der.pruefstand" Edition | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 500.50

ADDY GME engine housing spindled "der.pruefstand" Edition | Puch E50
undefined

For: Puch

35285

ADDY GME engine housing spindled "der.pruefstand" Edition | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 558.70

ADDY engine housing spindled 4-bearing | Puch E50
undefined

For: Puch

35303

ADDY engine housing spindled 4-bearing | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 465.60

ADDY exhaust H100A+
undefined

For: Puch

35372

ADDY exhaust H100A+

Manufacturer: ADDY · Material: Steel · Surface: varnished · Total length: 870 mm · Color: black · Ø Silencer: 55 mm · Exhaust type: Cone / double cone · Mounting type: Nuts & bolts · Mounting type: Stud bolts & nuts · Number of fixing points: 3 pcs · Flame tube attachment: Flange

EUR 314.20

ADDY exhaust H100A | Puch
undefined

For: Puch

35376

ADDY exhaust H100A | Puch

Manufacturer: ADDY · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 55 mm · Total length: 820 mm · Exhaust type: Cone / double cone · Mounting type: Nuts & bolts · Mounting type: Stud bolts & nuts · Number of fixing points: 3 pcs · Flame tube attachment: Flange

EUR 290.90

Moped fans like you also bought:

Return spring brake plate | Puch Maxi

For: Puch

10028

Return spring brake plate | Puch Maxi

Spring design: Nose feather · Spring design: Torsion spring · Length spring hook: 50 mm · Leg length: 45 mm · Area of application: Original · Material: Spring steel · Area of application: Standard · Surface: galvanized (blue) · Ø outside: 30 mm · Ø inside: 25.5 mm · Ø wire: 2.4 mm · Total length: 125 mm

EUR 5.70

Magura cable clamp Ø 8 x 15 mm
undefined

For: Universal · Puch · Sachs

10057

Magura cable clamp Ø 8 x 15 mm

Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Ø Bundle: 6 mm · Thread length: 7 mm · Width across flats SW: 7 mm · Area of application: Standard

EUR 2.90

Large outlet seal with metal ring

For: Puch

10113

Large outlet seal with metal ring

Material: Sealing carton · Material: Sheet metal (steel) · Reinforced: Yes · Place of use: Outlet · Ø outlet inside: 27 mm · Thickness: 2.1 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.3 mm · Area of application: Tuning

EUR 3.50

GPO sprocket 12 teeth (wide) | Puch
undefined

For: Puch

10117

GPO sprocket 12 teeth (wide) | Puch

Manufacturer: GPO · Material: Steel · Surface: Hardened · Ø inside: 13.7 mm · Ø inside: 16.9 mm · Chain type: 415H · Recording type: Interlocking · Chain pitch: 1/2" x 3/16" · Number of teeth: 12 pcs · Total thickness: 4.6 mm

EUR 9.30

swiing® revival snap ring low control bearing set (version 2.0)
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10143

swiing® revival snap ring low control bearing set (version 2.0)

Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Height: 7 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Thickness: 0.6 mm · Puch OEM number: 349.1.30.015.1 · Sachs OEM no.: P0521

EUR 2.90

Racing swingarm chrome | Puch Maxi S, Puch X30 NG-2A
undefined

For: Puch

10153

Racing swingarm chrome | Puch Maxi S, Puch X30 NG-2A

Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 360 mm · Width: 165 mm · Wide intake: 125 mm · Height: 125 mm · Area of application: Racing

EUR 81.40

Not in stock

Magura set screw M6x34 mm lock nut SW8
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo · Cilo

10170

Magura set screw M6x34 mm lock nut SW8

Manufacturer: Magura · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø cable holder: 3.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Ø Receptacle: 7.05 mm · Thread length: 24 mm · Total length: 34 mm · Width across flats nut: 8 mm

EUR 2.90

GPO rubber for swingarm mounting | Puch Maxi S, X30
undefined

For: Puch

10216

GPO rubber for swingarm mounting | Puch Maxi S, X30

Manufacturer: GPO · Material: Rubber · Ø inside: 24 mm · Ø outside: 32 mm · Ø outside: 37 mm · Total length: 90 mm · Color: black · Puch OEM number: 349.1.21.509.1

EUR 11.50

swiing® revival shock absorber axle galvanized | Puch Maxi S
undefined

For: Puch

10253

swiing® revival shock absorber axle galvanized | Puch Maxi S

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 200 mm · Thread type: M8x1.25 (standard thread)

EUR 7.55

Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10273

Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm

Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm

EUR 2.30

excitement
  • Youtube
  • Facebook
  • Instagram
excitement-mobile
PrepaymentInvoiceVisaMastercardPostFinancePayPalTWINTKlarna