
Original Bing 85/8/101 carburetor suitable for your moped / moped which was equipped with a Sachs 504 and 535 engine
.This carburetor was also used on models such as Hercules Prima, KTM, Batavus and Sparta.
| Nominal diameter | 8 mm |
| Manufacturer | BING |
| Component group Carburetor | Carburetor complete |
| Carburetor type | 85 |
| Ø fuel hose connection | 6 mm |
| Nozzle thread | M4x0.7 (standard thread) |
| Nozzle size | 48 |
| Ø Internal connection | 20 mm |
| Air filter connection thread | M5x0.8 (standard thread) |
| Mounting type | Plug connection clamped |
| Area of application | Original |
| Sachs | 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
| Hercules | |
| KTM | |
| Batavus |
Accessories & related products
GPO air filter insert | Sachs 503 AB/ABL, 504 CH (A4336)
Color: black · Color: white · Manufacturer: GPO · Camouflaged: No · Material: Paper · Ø inside: 15.5 mm · Total length: 58 mm · Width: 58 mm · Ø outside: 48.7 mm · Height: 62 mm · Area of application: Standard · Pony OEM number: A4336 · Sachs OEM no.: 0225 010 100
EUR 10.50
BING 75° carburetor pipe bend M7x0.75 NOS
Manufacturer: BING · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: 85 · Thread type: MF7x0.75 (fine pitch thread) · Internal thread: MF6x0.75 (fine pitch thread) · Ø outside: 7 mm · Angle: 75 ° · Width across flats nut: 9 mm · Height: 36.5 mm · Height: 39.5 mm · Total length: 44 mm · Total length: 50 mm
EUR 34.20
Moped fans also bought
Magura set screw M5x34 mm
Slotted: No · Manufacturer: Magura · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated · Ø cable holder: 2.55 mm · Total length: 34 mm · Thread length: 24 mm · Thread type: M5x0.8 (standard thread) · Ø Receptacle: 7.05 mm · Width across flats nut: 8 mm
EUR 2.95
Transval speedometer drive 17" with grease nipple
Place of use: left · Place of use: right · Manufacturer: Transval · Material: Aluminum · Color: gray · 4-edge speedometer cable: 1.8 mm · Wheel size: 17 " · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Overall width outside: 60 mm · Ø mounting hole: 11 mm · Ø outside: 41 mm · Total height: 52 mm
EUR 35.40
GPO air filter insert | Sachs 503 AB/ABL, 504 CH (A4336)
Color: black · Color: white · Manufacturer: GPO · Camouflaged: No · Material: Paper · Ø inside: 15.5 mm · Total length: 58 mm · Width: 58 mm · Ø outside: 48.7 mm · Height: 62 mm · Area of application: Standard · Pony OEM number: A4336 · Sachs OEM no.: 0225 010 100
EUR 10.50
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: black · Total length: 165 mm · Filter type: Racing screen · Width: 68 mm · Height: 52 mm · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Area of application: Tuning
EUR 71.00







