Original pole wheel for various mopeds, mopeds and small motorcycles with mechanical breaker ignition and clockwise rotating engine.
The magnetic flywheel can be used for single-automatic engines, e.g. Puch Maxi E50.
Weight: 900 grams
Ø inside: 91.1 mm
Ø outside: 116.5 mm
Matching attachments for the ignition wheel such as ignition plate, interrupter, condenser, ignition coil, ignition plug, etc. can be found in the accessories section.
The following number is stamped on the ignition wheel: 0212124039, 6V22 - 5/10 W
NOS - new from old stock.
| Manufacturer | BOSCH |
| Material | Steel |
| Ø Internal flywheel | 91.2 mm |
| Thread type | MF26x1.5 (fine pitch thread) |
| Direction of rotation | right |
| Ø cone small inside | 11.9 mm |
| Height | 36.6 mm |
| Ø cone large inside | 15 mm |
| Ø Flywheel outside | 115.8 mm |
| Thread length | 6.5 mm |
| Cone length | 17.8 mm |
| Cone ratio | 1:5 |
| Weight | 900 g |
| Puch | E50 |
Accessories & related products
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Area of application: Original · Area of application: Standard · Material: Steel · Ø axle: 4 mm · Cable available: Yes · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · BOSCH OEM number: 1 217 013 025 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BERU OEM number: 0 340 100 710
EUR 23.50
BERU breaker with cable | Bosch / Ducati
Manufacturer: BERU · Area of application: Original · Area of application: Standard · Material: Steel · Ø axle: 4 mm · Cable available: Yes · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Alternative version of the Pony OEM number: A4606 · BOSCH OEM number: 1 217 013 025 · Alternative version of the Sachs OEM number: 0983 106 000 · BERU OEM number: 0 340 100 710
EUR 17.60
swiing® revival screw-in condenser | Bosch / Ducati
Height: 23 mm · Ø outside: 18 mm · Manufacturer: swiing® revival parts · Thread type: M3x0.5 (standard thread) · Area of application: Original · Area of application: Standard · Capacity: 0.16 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Total height: 32 mm · BOSCH OEM number: 2 207 330 050
EUR 11.70
DUCATI ignition coil (1A quality)
Height: 17 mm · Manufacturer: DUCATI · Place of use: Internal (in the ignition) · Area of application: Original · Area of application: Standard · Color: black · Ø cable holder: 5.9 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Cable length: 37 mm · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Total length: 76.5 mm · Pony OEM number: A2114 · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 76.70
swiing® revival ignition plate 90 mm Bosch / DUCATI
Ø inside: 18.5 mm · Ø outside: 90 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Number of cables: 3 pcs · Tension: 6 V · Cable length: 450 mm · Cable length: 550 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
EUR 129.90
swiing® revival ignition plate 90 mm with DUCATI components
Manufacturer: swiing® revival parts · Area of application: Standard · Ø cable: 5 mm · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Tension: 6 V · Number of fixing points: 3 pcs · Performance: 17 W · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
EUR 183.10
HS-Retro nut M10x1 SW14 flywheel CNC original
Height: 10 mm · Ø outside: 19.8 mm · Manufacturer: HS-Retro · Thread type: MF10x1 (fine pitch thread) · Material: Steel · Surface: burnished · Nut type: Flange nut · Width across flats SW: 14 mm · Drive: External hexagon · Alternative version of the Pony OEM number: A4513 · Alternative version of the Puch OEM number: 901.2943 · Alternative version of the Sachs OEM number: 0942 072 102
EUR 10.30
Moped fans also bought
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø Pin: 4.15 mm · Ø bore: 4.2 mm
EUR 40.10
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Ø outside: 61 mm · Manufacturer: GPO · Material: Metal · Material: Rubber · Area of application: Tuning · Color: Chrome · Color: black · Filter type: Grille · Length rubber part: 63.5 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Total length: 113 mm · Camouflaged: No
EUR 15.30
Collection only possible with online purchase and appointment.
