Cable duct made of dark gray plastic for Puch Maxi S, N and Supermaxi LG1, LG2 mopeds / mopeds.
The cable tunnel is mounted underneath the tank and ensures clean routing of all cables. Throttle and clutch cables are pulled through the side openings of the cable cover.
Further cable guides in various colors can be found in the accessories section.
Details
| Material | Plastic |
| Color | gray |
| Ø mounting hole | 5.3 mm |
| Total length | 320 mm |
| Height | 22 mm |
| Width | 58 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Total length: 47 mm · Thread length: 50 mm · Total length: 60 mm
EUR 15.00
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Color: Chrome · Drive: Slot · Drive: Triangular head · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Total length: 48 mm · Thread length: 50 mm · Total length: 63 mm
EUR 17.50
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Surface: blank · Ø outside: 2.6 mm · Ø outside: 4 mm · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 12 mm · Carburetor type: 18 Catalyst · Carburetor type: 85 · Color: black · Color: silver · Width: 3.3 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 8.05
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Area of application: Tuning · Ø inside: 14.5 mm · Ø External connection: 20 mm · Total length: 47 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Total height: 54 mm · Height flange center hole: 43 mm · Camouflaged: Yes · Hole spacing inlet: 38 mm
EUR 14.00
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Height: 55 mm · Total length: 135 mm · Ø cylinder: 38 mm · Width: 125 mm · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Area of application: Standard
EUR 38.30
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: powder-coated · Ø inside: 94 mm · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Color: black · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Thickness: 4.5 mm · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm
EUR 23.20
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Test mark: none · Height: 110 mm · Color: black · Color: red · Bulb holder: BA15s · Ø Receptacle: 4 mm · Tension: 6 V · Width: 60 mm · Mounting type: Nuts & bolts · Brake light: No · Reflectors: Yes · Battery operated: No · Number of fixing points: 2 pcs · Depth: 80 mm
EUR 42.50
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Color: silver · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Shank: No · Number of components: 24 pcs · Thread length: 22 mm · Strength class: 8.8 · Width across flats SW: 10 mm
EUR 9.20
Collection only possible with online purchase and appointment.
