Original 1.2 hp clutch with 56 mm for Piaggio mopeds such as Ciao, SI, Bravo and identical models with mono gearbox and 16" cast rims.
Note: During assembly, it is essential to adjust the axial play of the clutch bell, which should be 0.1-0.2 mm, in order to prevent the rivets from sticking to the starter clutch. The liner must be removed before fitting the clutch, the needle bearings inside the clutch must then be filled with grease, otherwise the clutch bearing will run dry and seize up.
Suitable spacers can be found in the accessories section.
Original Piaggio spare part number: 1651505/ 4803595
Made by the Italian brand CIF.
| Manufacturer | CIF |
| Ø Outer pulley | 56 mm |
| Material | Steel |
| Number of springs | 3 pcs, 2 pcs |
| Ø inside | 82 mm |
| Ø outside | 90 mm |
| Number of jaws | 3 pcs, 2 pcs |
| Area of application | Standard |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
GPO clutch spring set (+40 %) Mono | Piaggio Ciao, SI, Bravo, Boxer
Spring design: Tension spring · Surface: varnished · Color: red · Ø wire: 1.3 mm · Total length: 22 mm · Manufacturer: GPO · Ø outside: 7 mm · Material: Spring steel · Alternative version of the Piaggio OEM number: 121753 · Alternative version of the Piaggio OEM number: 289451
EUR 15.30
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX / C24, Bravo, SUPERbravo
Color: black · Total length: 46 mm · Width: 60 mm · Height: 96 mm · Manufacturer: Dell'Orto · Mounting type: Plug connection clamped · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Nominal diameter: 13 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 66
EUR 71.10
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
