Set consisting of 70 mm puller and drive belt of the Dayco brand with 940 mm length suitable for Piaggio Ciao mopeds / mopeds with mono drive.
The engine position is in the middle when using the original standard clutch bell (Ø 56 mm on the outside of the engine).
Technical data of the drive belt:
Unrolling circumference (effective outer length): 940 mm
Upper belt width: 10 mm
Height: 8.5 mm
Surface: toothed
You can find more pulleys, clutches and other attachments in the accessories section.
Made by the Italian brand CIF.
Details
| Manufacturer | CIF |
| Material | Steel |
| Surface | galvanized (blue) |
| Gearbox type | Mono |
| Ø Outer pulley | 70 mm |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 |
Accessories & related products
Not so nice 
Clutch 56 mm (reproduction) | Piaggio, Ciao, SI, Bravo, Boxer
Manufacturer: Quenching · Material: Steel · Ø Outer pulley: 56 mm · Surface: coated · Material addition: Composite materials · Area of application: Standard · Number of jaws: 2 pcs · Number of jaws: 3 pcs · Number of springs: 2 pcs · Number of springs: 3 pcs · Ø inside: 8.45 mm · Ø inside: 12 mm · Ø outside: 90 mm
EUR 47.20
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm
EUR 2.35
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Total length: 8 mm · Drive: Slot
EUR 24.70
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24. Bravo, SUPERbravo
Width: 60 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Area of application: Tuning · Nominal diameter: 13 mm · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Total length: 46 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Height: 96 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Camouflaged: No · Nozzle size: 66
EUR 70.90
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Width: 95 mm · Manufacturer: Malossi · Material: Plastic · Color: black · Area of application: Tuning · Total length: 31.2 mm · Filter type: Foam · Ø outside: 53.2 mm · Ø Internal connection: 51 mm · Height: 88.7 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 23.60
Collection only possible with online purchase and appointment.
