Three-jaw centrifugal clutch made of aluminum suitable for your Puch Maxi moped / moprf with E50 engine.
The centrifugal clutch has 3 lightweight aluminum jaws. Thanks to the lighter weight, the clutch engagement point is shifted backwards, which ensures a higher speed when starting off.
We recommend using the clutch up to a maximum of 50 cc.
Details
| Ø inside | 12 mm, 14.6 mm |
| Ø outside | 93 mm |
| Thickness | 20.9 mm |
| Material | Steel, Aluminum |
| Material addition | Composite materials |
| Number of springs | 3 pcs |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Area of application | Standard, Original |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Ø outside: 8.3 mm · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø wire: 1.7 mm · Total length: 28 mm
EUR 20.80
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Thickness: 0.35 mm · Ø inside: 106 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.80
swiing clutch springs reinforced (+50%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Manufacturer: swiing · Ø outside: 8.45 mm · Total length: 26.6 mm · Material: Spring steel · Surface: coated · Color: red · Number of components: 3 pcs · Area of application: Tuning
EUR 20.80
swiing clutch springs reinforced (+60%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.9 mm · Manufacturer: swiing · Color: yellow · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 20.80
Moped fans like you also bought:
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
EUR 11.50
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Drive: Slot · Number of components: 2 pcs · Screw head: Lens head · Ø External head: 14 mm · Total length: 14.6 mm · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4.10
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Total length: 106 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Diameter: 5.9 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.65
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Thickness: 1 mm · Ø inside: 106 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.55
Collection only possible with online purchase and appointment.
