1/2" x 3/16" chain, which has 128 links and is suitable for driving various mopeds, mopeds and small motorcycles. This roller chain has also been installed on bikes such as Puch, Puch Maxi, Sachs, Hercules, Pony, Tomos, Kreidler, Alpa, Zündapp, etc.
The chain lock with spring lock, also known as a clip lock, is included in the scope of delivery.
Pitch: 1/2x3/16 (415)
Finish: H (heavy-duty finish with reinforced links and enlarged joint surfaces)
Length: 128 links
Since the drive chain must be shortened in any case, we recommend that you also order a chain breaker, as listed under accessories.
Branded product from the manufacturer CYC.
| Chain type | 415H |
| Chain pitch | 1/2" x 3/16" |
| Manufacturer | CYC |
| Material | Steel |
| Surface | varnished |
| Color | red |
| Number of chain links | 128 pcs |
| Chain lock type | Spring lock |
| Rolling circumference | 1626 mm |
| Universal |
| Puch |
| Sachs |
| Pony / Cilo (Beta 521 & 512) |
| Zündapp Belmondo |
| Tomos |
| Bye Bike |
Ratings
Accessories & related products
Explore categories from Drive & transmission
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard · Decompressor: Yes
EUR 11.80
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard
EUR 2.85
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm
EUR 2.35
GPO sprocket 45 teeth chrome | Puch Maxi, X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: silver · Ø inside: 94 mm · Number of teeth: 45 pcs · Ø bolt circle: 106 mm · Ø mounting hole: 6.7 mm · Number of fixing points: 6 pcs · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
EUR 43.80
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 94.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
