Black, adjustable shock absorbers for your moped, scooter, and small motorcycle.
The stiffness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mounting point to mounting point): 260 mm
; Outer diameter of coil spring: 44 mm
; Shaft diameter: 28 mm
; Sleeve diameter for mounting: 10 mm
The rear springs should always be secured with large U-washers to prevent the plastic bushings from shifting when lateral forces are applied.
The package includes one pair.
Rear springs from other manufacturers, the matching adjustment wrench, as well as the washers and mounting hardware can be found in the accessories section.
Brand-name product from the manufacturer DMP.
| Ø outside | 44 mm |
| Color | black |
| Total length | 290 mm |
| Manufacturer | DMP |
| Material | Steel |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 28 mm |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
| Hole spacing | 260 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Surface: galvanized (blue) · Screw head: Hexagon · Nominal diameter (thread): 8 mm
EUR 14.10
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 8 mm
EUR 21.20
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Mounting type: Nuts & bolts · Ø spars: 24 mm · Ø outside: 46 mm · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Total length: 295 mm · Number of fixing points: 2 pcs · Hole spacing: 260 mm
EUR 59.20
YSS Shock absorber Racing 28 cm (oil pressure)
Manufacturer: YSS · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Mounting type: Nuts & bolts · Ø spars: 280 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Total length: 310 mm · Number of fixing points: 2 pcs · Hole spacing: 280 mm
EUR 154.10
Explore categories from Shock absorber & swingarm
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Screw head: Hexagon · Ø Bundle: 6 mm · Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Width across flats: 7 mm · Ø outside: 8 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Drive: Slot · Area of application: Standard · Total length: 15 mm · Thread length: 7 mm
EUR 2.95
- 16 %
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Strength class: 10.9 · Material: Steel · Diameter: 5.95 mm · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm
EUR 2.15
EUR 1.80
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Mounting type: Union nut · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Screw head: Lens head · Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Drive: Slot · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.35
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: silver · Total length: 47 mm · Total length: 60 mm · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
EUR 15.30
Working late? Evening hours on Thursday until 20:00
