Short-stroke throttle grip with two throttle cable mounts for your moped, scooter, small motorcycle, and motorcycle.
The dual-cable throttle grip can be used on handlebars with an outer diameter of 22 mm.
Maximum throttle travel: 66 mm (36 mm / 74°)
Scope of delivery as shown in Figure 1.
You can find matching throttle cable clamps and additional grip covers in the accessories section.
A quality product from the Italian manufacturer Domino.
| Manufacturer | Domino |
| Color | white, black |
| Housing material | Plastic |
| Number of components | 4 pcs |
| Gas route | 66 mm |
Accessories & related products
Magura Cable Clamp Ø 8 x 9 mm
Manufacturer: Magura · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Number of components: 1 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Total length: 9 mm · Screw head: Hexagon · Thread length: 5 mm · Ø outside: 8 mm · Width across flats: 7 mm · Area of application: Standard
EUR 2.35
Domino throttle grip (74mm, 3.6°/mm)
Manufacturer: Domino · Material: Plastic · Material: Rubber · Material: Steel · Housing material: Plastic · Surface: raw · Ø inside: 22 mm · Color: black · Gas route: 74 mm · Total length: 160 mm · Degree of movement: 3.6° / mm · Number of components: 5 pcs
EUR 47.30
Explore categories from Handles & fittings
Moped fans also bought
Magura Cable Clamp Ø 8 x 9 mm
Manufacturer: Magura · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Number of components: 1 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Total length: 9 mm · Screw head: Hexagon · Thread length: 5 mm · Ø outside: 8 mm · Width across flats: 7 mm · Area of application: Standard
EUR 2.35
Dell'Orto 40° carburetor elbow set M6x0.75
Ø outside: 6 mm · Total length: 30.5 mm · Total length: 37.5 mm · Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Height: 57 mm · Height: 67 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 40 °
EUR 14.10
Transval Speedometer Drive, 17", with Bracket, 11 mm Axle (for VDO Speedometer Cable)
Ø outside: 41 mm · Manufacturer: Transval · Material: Aluminum · Place of use: left · Place of use: right · Wheel size: 17 " · Thread type: MF10x1 (fine pitch thread) · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 11 mm · Ø axle: 11 mm
EUR 33.10
Not in stock
Nut M6x0.75 Carburetor pipe bend Dell'Orto SHA carburetor | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF6x0.75 (fine pitch thread) · Drive: External hexagon · Height: 3 mm · Nominal diameter (thread): 6 mm · Width across flats: 8 mm
EUR 2.85
GPO wheel clamp 12 mm cranked reinforced (per piece) | Puch Maxi, Supermaxi, X30, Velux
Surface: galvanized (blue) · Ø inside: 13.1 mm · Total length: 75 mm · Ø outside: 23.7 mm · Manufacturer: GPO · Material: Steel · Thread type: M6x1 (standard thread) · Cranking (offset): 6 mm · Thread length: 35 mm
EUR 3.45
Working late? Evening hours on Thursday until 20:00
