Chrome-plated frame reinforcement from EBR suitable for Puch Maxi S / N mopeds.
This is often used on tuned mopeds to protect the frame from deformation due to the extra power.
The two rods have an outer diameter of 18 mm.
Length of mounting hole - stop (adjustable): Approx. 56 - 59 cm
Internal dimension for frame mount: 47 mm
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Steel |
| Surface | chrome-plated |
| Ø outside | 18 mm |
| Hole spacing | 47 mm |
| Number of fixing points | 3 pcs |
| Total length | 560 - 590 mm |
| Color | Chrome |
| Mounting type | Nuts & bolts |
| Puch | E50 |
Explore categories from Formwork & frame parts
Moped fans also bought
GPO mudguard strut silver | Puch Maxi S, N
Manufacturer: GPO · Color: silver · Material: Steel · Outer width: 25.5 mm · Surface: varnished · Mounting type: Nuts & bolts · Total length: 240 mm · Distance mudguard - center hole: 197 mm · Distance mudguard - center hole: 231 mm · Ø mounting hole: 6 mm · Wide intake: 53 mm · Hole spacing: 40 mm · Wheel size: 17 " · Number of fixing points: 8 pcs
EUR 14.80
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: angular · Mounting type: Nuts & bolts · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm
EUR 41.40
swiing® revival 17" rear fender primed | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Color: black · Folding the ends: closed folded · Folding the ends: not folded · Wheel size: 17 " · Shape of the mudguard: angular · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm · Mounting type: Nuts & bolts
EUR 40.20
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Manufacturer: AKOA · Material: Plastic · Area of application: Tuning · Color: black-matt · Ø inside: 20.7 mm · Ø External connection: 26 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs
EUR 35.50
swiing® revival Screw Set, Engine, Stainless Steel, Small | Puch E50
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Puch OEM number: 900.1216 · Puch OEM number: 900.1308
EUR 23.60
Self-tapping screw, Ø 2.9 x 13, pan head, Phillips, stainless steel
Material: Chrome steel (colloquially known as stainless steel) · Thread type: Sheet metal screw · Nominal diameter (thread): 2.9 mm · Drive: Cross recess · Screw head: Lens head · Shank: No · Total length: 13 mm · Thread length: 13 mm
EUR 1.05
swiing® revival screw set front fender Inox | Puch Maxi S, N
Screw head: Hexagon · Screw head: Lens head · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Drive: External hexagon · Drive: Slot · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Shank: No · Thread length: 10 mm · Thread length: 15 mm · Number of components: 30 pcs · Storage method: Sack · Width across flats: 8 mm · Strength class: A2-70
EUR 15.10
Working late? Evening hours on Thursday until 20:00
