Racing kit with 44 mm diameter for your Tomos moped / moped with A35 engine.
This 65 cc racing cylinder made of aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) impresses with its good workmanship and long service life.
In order to get the full power out of the tuning cylinder, a racing exhaust and a carburetor with plenty of oomph should be fitted.
All necessary gaskets, piston pins, piston rings and circlips are included in the scope of delivery.
Note: Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Nominal diameter | 44 mm |
| Manufacturer | GPO |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 65 ccm |
| Area of application | Tuning |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 47.8 mm |
| Ø outlet inside | 22.8 mm |
| Inlet window | 35.5 x 29.5 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 36 mm, 39 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | slanted |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | No |
| Camouflaged | No |
| Tomos |
Accessories & related products
GPO piston 44 mm (12 mm KoBo) | Tomos A3/A35
Manufacturer: GPO · Ø outside piston (A): 43.96 mm · Compression height (C): 21.9 mm · Curvature (D): 4.15 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 44 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm
EUR 45.00
Explore categories from Cylinder
Moped fans also bought
swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.15
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Total length: 82 mm · Color: black · Nominal diameter: 15 mm · Width: 70 mm · Nozzle thread: M5x0.8 (standard thread) · Height: 100 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 68 · Ø Inside entrance: 15 mm · Ø Internal connection: 18 mm · Ø Output inside: 15 mm · Ø Air filter connection: 59 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning
EUR 82.90
DMP 44 mm cylinder head (higher compression) | Tomos
Manufacturer: DMP · Material: Aluminum · Surface: glass bead blasted · Ø cylinder: 44 mm · Ø screw holder: 8 mm · Total length: 145 mm · Width: 145 mm · Hole pattern [mm]: 44 x 44 · Height: 66 mm · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Racing · Area of application: Tuning
EUR 71.10
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
