Fan-cooled 38 mm original cylinder compatible with your Puch X30 Velux, X30 NG-2AH, or X30 NG-2A moped.
This reproduction cylinder is equipped with a seal, which is why it can be used as an original cylinder. The cylinder is made of gray cast iron and has a sandblasted surface.
For Velux engines, the small slot at the sealing surface must be filled with casting material so that the cylinder seals properly. We recommend using Wekem 2K liquid metal for this, which you can find in the accessories section.
Note: The cylinder is shipped loose and without a piston, gasket set, studs, or other mounting parts.
You can find matching gaskets, pistons, cylinder heads, and 2K liquid metal in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Nominal diameter | 38 mm |
| Manufacturer | GPO |
| Camouflaged | No |
| Material | Gray cast iron |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Hole spacing inlet | 32 mm |
| Hole spacing outlet | 42 mm |
| Number of fixing points | 4 pcs |
| Hole spacing for cylinder mounting | 44 mm |
| Area of application | Standard |
| Outlet type | straight |
| Puch | Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
swiing® revival stud bolt M6x106 (10.9 strength class)
Total length: 106 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Thread length: 20 mm · Puch OEM number: 360.1.10.034.1
EUR 2.15
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Ø outside: 90 mm · Material: Aluminum · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Ø screw holder: 6.4 mm · Height: 35 mm · Area of application: Standard · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44
EUR 47.30
Not in stock
WEKEM 2K Liquid Metal 24 ml
Temperature resistance (min.): -20 - 80 °C · Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Contents: 24 ml · Color: gray · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Type of application: 2K · Alignment time: 240 sec · Area of application: Chemistry
EUR 23.60
EUR 472.00/kg
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 38 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Area of application: Standard
EUR 10.60
Piston 38 mm (10 mm KoBo) short shirt | Puch fan-cooled
Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 10 mm · Piston ring height: 2 mm · Weight piston kit: 73 g
EUR 47.30
Explore categories from Cylinder
Moped fans also bought
Wheel axle set M12x1 x 165 front
Thread type: MF12x1 (fine pitch thread) · Manufacturer: Quenching · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Total length: 165 mm · Ø shaft: 11.9 mm · Shank length: 114 mm · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Height: 9.9 mm · Width across flats: 19 mm · Thread length: 25 mm · Thread length: 26 mm
EUR 17.50
EUR 13.70
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Ø outside: 90 mm · Material: Aluminum · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Ø screw holder: 6.4 mm · Height: 35 mm · Area of application: Standard · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44
EUR 47.30
Not in stock
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Nominal diameter: 40 mm · Ø outside piston (A): 39.94 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Weight piston kit: 89 g
EUR 41.40
WEKEM 2K Liquid Metal 24 ml
Temperature resistance (min.): -20 - 80 °C · Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Contents: 24 ml · Color: gray · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Type of application: 2K · Alignment time: 240 sec · Area of application: Chemistry
EUR 23.60
EUR 472.00/kg
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 38 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Area of application: Standard
EUR 10.60
Piston 38 mm (10 mm KoBo) short shirt | Puch fan-cooled
Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Compression height (C): 22.3 mm · Curvature (D): 3.6 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 10 mm · Piston ring height: 2 mm · Weight piston kit: 73 g
EUR 47.30
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Weight piston kit: 74 g
EUR 47.30
GPO 38 mm Original Cylinder, Fan-Cooled, 10 mm KoBo | Puch X30 Velux, NG-2AH, NG-2A
Nominal diameter: 38 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 10 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Standard
EUR 148.20
EUR 132.80
GPO 38 mm Original Cylinder, Fan-Cooled, 12 mm KoBo | Puch X30 Velux, NG-2AH, NG-2A
Nominal diameter: 38 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Standard
EUR 148.20
Working late? Evening hours on Thursday until 20:00
