
High-quality replica tie rod for Zündungen with small Bosch flywheel, which were installed on Zündapp ZD 10, ZD 30, ZR 10, ZR 20, ZR 30, ZA 25 and ZA 40 mopeds, among others.
Hole spacing (center - center): 46.5 mm
Hole diameter: 4.6 mm
For flywheels with an inner diameter of 80 mm
Original Zündapp spare part number: 249-07.908
Original BOSCH spare part number: 2 204 211 052
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Ø cable holder | 6.1 mm |
| Color | black |
| Place of use | Internal (in the ignition) |
| Cable length | 68 mm |
| Total length | 69.7 mm |
| Mounting type | Screws |
| Ø mounting hole | 4.6 mm |
| Ø Internal flywheel | 80 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 46.5 mm |
| Area of application | Standard, Original |
| Height | 11 mm |
| Zündapp |
Moped fans also bought
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.50
BERU breaker with cable | Bosch / Ducati
Material: Steel · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Manufacturer: BERU · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Cable available: Yes · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · Alternative version of the Sachs OEM number: 0983 106 000 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 17.80
EFFE screw-in condenser | Bosch / Minarelli
Height: 25 mm · Manufacturer: EFFE · Ø outside: 18 mm · Capacity: 0.22 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Thread type: M3x0.5 (standard thread) · Area of application: Original · Area of application: Standard · Total height: 28 mm · Minarelli OEM number: 8201306 · BOSCH OEM number: 2 207 330 041 · BOSCH OEM number: 2 207 330 050
EUR 14.90
BERU breaker with cable (small) | Bosch / Ducati / Minarelli
Material: Steel · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Manufacturer: BERU · Ø Internal flywheel: 80 mm · Cable available: Yes · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Pony OEM number: A2496 · Morini OEM number: 29 0026 005 · Morini OEM number: 29 0034 005 · Minarelli OEM number: 82 000 16 · BOSCH OEM number: 2 207 013 005 · BOSCH OEM number: 2 207 110 007 · BERU OEM number: 0 340 100 458 · Fantic OEM number: 320 4500 5150
EUR 22.60
swiing® revival screw-in condenser | Bosch / Ducati
Height: 23 mm · Manufacturer: swiing® revival parts · Ø outside: 18 mm · Capacity: 0.16 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Thread type: M3x0.5 (standard thread) · Area of application: Original · Area of application: Standard · Total height: 32 mm · BOSCH OEM number: 2 207 330 050
EUR 11.80
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Choke control: Hand choke · Width: 50 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 66 mm · Height: 95 mm · Nozzle size: 62 · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Tuning · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 95.40
EUR 85.90
DUCATI screw-in condenser | Bosch / Ducati
Manufacturer: DUCATI · Capacity: 0.2 µF · Ø outside: 18 mm · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 23.5 mm · Thread type: M3x0.5 (standard thread) · Total height: 30.5 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A2090 · Alternative version of the Pony OEM number: A2092 · Alternative version of the Pony OEM number: A5520 · Alternative version of the Sachs OEM number: 0265 052 003 · Alternative version of the Sachs OEM number: 0265 052 007 · Alternative version of the Sachs OEM number: 0265 202 000
EUR 23.80
Not in stock








