Special multi-puller tool for versatile use on your moped / moped.
The 7-in-1 tool can be used for the following items:
- swiing Zündung (34 mm)
- MVT Zündung (36 mm)
- PVL Zündung (34 mm)
- HPI Zü(34 mm)
- Selettra Zündung (34 mm)
- KTM coupling (30 mm)
- E50 replica coupling (30 mm)
Thread: M12
Wrench width (SW): 17 mm
Material: Steel, galvanized
Attention: Cannot be used for the original E50 & Surflex clutch.
The respective positions are lasered around the tool so that the application always works on the first attempt.
The corresponding screws and the thread protection cover are included in the scope of delivery.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Width across flats Screw | 17 mm |
| Manufacturer | GPO |
| Material | Steel |
| Surface | galvanized (blue) |
| Area of application | Special tool |
| Thread type | M12x1.75 (standard thread) |
| Universal |
| Puch |
| Sachs |
| Piaggio |
Accessories & related products
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 11.80
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Light coil voltage: 12 V · Weight: 340 g · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 6 pcs · Ø Internal flywheel: 61.5 mm · Tension: 12 V · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Performance: 60 W · Area of application: Tuning · Mounting type: Screws
EUR 355.80
Buzzetti flywheel trigger combination M26x1.5 / M27x1.25
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: Buzzetti · Material: Steel · Surface: galvanized (blue) · Thread type: MF26x1.5 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 23.60
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 403.30
Selettra internal rotor ignition left-, right-turning
Manufacturer: Selettra · Material: Aluminum · Performance: 90 W · Direction of rotation: left · Direction of rotation: right · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 308.40
PVL internal rotor ignition clockwise without keyway
Manufacturer: PVL · Material: Aluminum · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 296.50
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Weight: 268 g · Manufacturer: MVT Allumage · Manufacturer: swiing® ingenious parts · Tension: 12 V · Mounting type: Screws · Performance: 65 W · Direction of rotation: left · Ø mounting plate: 96 mm · Number of fixing points: 2 pcs · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 433.00
swiing® ingenious Special Screw M12x1.25, tapered, 90°, galvanized
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Nominal diameter (thread): 12 mm · Drive: External hexagon · Width across flats: 18 mm · Area of application: Standard · Total length: 38 mm · Thread length: 38 mm · Strength class: 10.9 · Number of components: 1 pcs
EUR 9.95
Normio M6x30 Cylinder Head Hex Head Screw, Strength Class 12.9, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 10 mm · Shank: No · Total length: 36 mm · Thread length: 30 mm · Strength class: 12.9
EUR 2.50
swiing® ingenious screw M12x1.25 x 51 hexagonal ball end & cap
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Nominal diameter (thread): 12 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats: 19 mm · Area of application: Special tool · Area of application: Workshop accessories · Thread length: 42 mm · Number of components: 1 pcs
EUR 10.60
Explore categories from Tools
Moped fans also bought
Hot
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 11.80
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
EUR 2.85
Working late? Evening hours on Thursday until 20:00
