Chain tension roller made from wear-resistant plastic. This roller was often used universally on older mopeds.
Ø outer roller: 40 mm
Ø chain roller: 29 mm
Roller width: 19 mm
Bolt dimension: M8 x 40 mm
Supplied including chrome steel bolt, nut and washers / shims and the important bushes.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Plastic, Chrome steel (known as Nirosta®) |
| Ø outside chain roller | 40 mm |
| Thread type | M8x1.25 (standard thread) |
| Ø inside chain roller (chain run) | 29 mm |
| Roll width outside | 19 mm |
| Color | black |
| Roller width inside (max. chain width) | 10 mm |
| Number of fixing points | 1 pcs |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
| Cilo |
Ratings
Accessories & related products
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Color: black · Color: silver · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
EUR 11.70
Chain tensioner 70 mm Simplex | Puch Maxi N, X30 Velux
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Number of teeth: 10 pcs · Total length: 140 mm · Ø outside sprocket: 36 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm
EUR 28.30
swiing® revival chain tensioner Inox | Sachs
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Material: Plastic · Material: Steel · Surface: chrome-plated · Thread type: M8x1.25 (standard thread) · Ø outside chain roller: 40 mm · Ø inside chain roller (chain run): 29 mm · Color: Chrome · Color: black · Roll width outside: 19 mm · Roller width inside (max. chain width): 10 mm · Total length: 94 mm · Number of fixing points: 1 pcs · Width: 19 mm
EUR 41.40
Buzzetti chain tensioner (1A quality) | Puch Maxi N
Manufacturer: Buzzetti · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Color: black · Color: silver · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
EUR 29.50
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Rolling circumference: 1626 mm · Color: gray · Ø bore: 4 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock
EUR 14.80
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Nipple shape: Cylinder · Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.85
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift
EUR 11.70
EUR 26.00/l
Union pedals plastic standard
Manufacturer: Union · Material: Plastic · Material: Steel · Surface: rubberized · Thread type: FG14.3 (9/16" 20G) · Width across flats: 15 mm · Color: black · Total length: 129 mm · Height: 29 mm · Width: 77 mm · Drive: Hexagon socket · Drive: Outer edge · Reflectors: Yes
EUR 15.30
Manual indoor cable set
Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Manufacturer: Made in Germany · Quantity: 4 pcs · Material: Steel · Total length: 2200 mm
EUR 11.70
Collection only possible with online purchase and appointment.
