Black, adjustable shock absorbers with orange coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Manufacturer | GPO |
| Surface | varnished |
| Color | orange, black |
| Damping type | Spring |
| Ø outside | 50 mm |
| Ø Fastening inside | 10 mm |
| Ø spars | 30 mm |
| Adjustable | Yes |
| Hole spacing | 300 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.90
EUR 2’590.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Mounting type: Nuts & bolts · Hole spacing: 330 mm · Ø outside: 52 mm · Number of fixing points: 2 pcs
EUR 165.30
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Color: Chrome · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Mounting type: Nuts & bolts · Hole spacing: 300 mm · Ø outside: 46 mm · Number of fixing points: 2 pcs
EUR 59.00
Moped fans also bought
Rear light glossy chrome - red
Material: Plastic · Test mark: none · Color: Chrome · Color: red · Width: 65 mm · Height: 45 mm · Bulb holder: BA9s · Ø Receptacle: 3.5 mm · Mounting type: Nuts & bolts · Brake light: No · Battery operated: No · Reflectors: Yes · Number of fixing points: 1 pcs · Depth: 55 mm
EUR 11.70
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10 mm · Ø axle: 12 mm · Ø outside: 91 mm · Ø External brake pads: 80 mm · Total length: 187 mm · Ø bore: 12.2 mm · Wide cam holder: 12 mm · Cranking (offset): 8 mm · Brake lever length (lever length): 55 mm · Ø screw holder: 6.5 mm
EUR 82.60
swiing® revival chain tensioner Simplex | Sachs 503 / Pony GTX, Cross
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: black · Surface: galvanized (blue) · Color: silver · Ø outside chain roller: 40 mm · Ø inside chain roller (chain run): 29 mm · Roll width outside: 19 mm · Roller width inside (max. chain width): 10 mm · Total length: 120 mm · Ø mounting hole: 5 mm · Number of fixing points: 2 pcs
EUR 50.70
Collection only possible with online purchase and appointment.
