Special CDI ignition box suitable for all HPI ignitions on your moped, moped and small motorcycle.
The ignition box has two additional cables with different ignition curves for the corresponding speed range.
The desired ignition curve is activated by connecting the corresponding cable. The two curves are not used for speed throttling, but are designed for different loads in the racing area.
To simplify matters, a switch can be connected. This makes it easy to switch between the two ignition curves at the touch of a button.
You can find the toggle switch, a corresponding ignition and suitable connectors in the accessories section.
Branded product from the manufacturer HPI – Horse Power Ignition.
| Manufacturer | HPI |
| Material | Plastic |
| Color | black |
| Number of fixing points | 1 pcs |
| Ø mounting hole | 6 mm |
| Area of application | Performance, Racing, High End, Tuning |
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 443.10
Hot 
HPI ignition box programmable (two ignition curves)
Material: Plastic · Color: red · Total length: 63 mm · Width: 100 mm · Height: 28 mm · Manufacturer: HPI · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Ø mounting hole: 7.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 360.40
Moped fans also bought
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Surface: sandblasted · Ø cylinder: 38 mm · Material: Aluminum · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Standard · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 38.90
Airsal 38 mm cylinder kit 50 cc camouflaged | Puch Maxi, X30
Nominal diameter: 38 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Inlet window: 23.5 / 20 x 14.5 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: Yes · Area of application: Tuning
EUR 118.10
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Camouflaged: Yes · Surface: sandblasted · Displacement: 65 ccm · Material: Aluminum · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 106.30
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Camouflaged: Yes · Surface: sandblasted · Ø cylinder: 45 mm · Material: Aluminum · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 38.90
swiing® revival nut M11x1 x 4 SW19 wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Height: 4 mm · Manufacturer: swiing® revival parts · Nut type: Hexagon flat nut · Thread type: MF11x1 (fine pitch thread) · Strength class: 8 · Width across flats SW: 19 mm
EUR 3.40
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Camouflaged: Yes · Surface: sandblasted · Ø cylinder: 44 mm · Material: Aluminum · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 50.70
swiing® ingenious intake manifold Gilardoni italkit Inox
Material: Aluminum · Manufacturer: swiing® ingenious parts · Mounting type: Screws · Number of fixing points: 4 pcs · Camouflaged: No · Ø inside: 21 mm · Area of application: Tuning · Ø External connection: 24 mm · Total length: 80 mm · Height flange center hole: 42.5 mm · Total height: 55 mm · Hole pattern [mm]: 60 x 35
EUR 80.30
Not in stock
Collection only possible with online purchase and appointment.
