1/2" x 1/4" chain with 144 links to drive your moped, small motorcycle and motorcycle.
This roller chain is used on vehicles such as the Kreidler Florett, Zündapp KS, etc.
The chain can also withstand somewhat higher loads. The chain lock with spring lock, also known as a clip lock, is included in the scope of delivery.
Pitch: 1/2x1/4 420 (wider than standard moped chains)
Finish: H (heavy-duty finish with reinforced plates and enlarged link surfaces)
Length: 144 links
Since the drive chain must be shortened in any case, we recommend that you also order a chain breaker, as listed under accessories.
Branded product from the manufacturer KMC.
| Chain type | 420H |
| Chain pitch | 1/2" x 1/4" |
| Manufacturer | KMC |
| Material | Steel |
| Surface | raw |
| Number of chain links | 144 pcs |
| Rolling circumference | 1829 mm |
| Chain lock type | Spring lock |
| Universal | |
| Sachs | |
| Kreidler |
Accessories & related products
KMC drive chain silver nickel-plated small motorcycle 420H (reinforced) 144L
Chain pitch: 1/2" x 1/4" · Chain type: 420H · Material: Steel · Surface: nickel-plated · Color: silver · Manufacturer: KMC · Number of chain links: 144 pcs · Rolling circumference: 1829 mm · Chain lock type: Spring lock
EUR 34.20
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Choke control: Hand choke · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Mounting type: Plug connection clamped · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 76.70
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Area of application: Tuning · Ø inside: 14.5 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Total height: 54 mm · Height flange center hole: 43 mm · Total length: 47 mm · Camouflaged: Yes
EUR 14.10
GPO sprocket 9 - 21 teeth wide | Puch
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: Hardened · Recording type: Interlocking · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
EUR 9.35
Collection only possible with online purchase and appointment.
