Oldie luggage carrier with clamp for your older Piaggio Ciao P moped / moped.
The rear luggage carrier is only suitable for the old model with rigid, angular seat post and rear light on the mudguard.
Mounting takes place at the original attachment points under the saddle and on the screws of the seat stays. The tool compartment remains accessible.
Total length: 500 mm
Width: 165 mm
Height: 100 mm
Fixing distance front: 60 mm
Fixing distance rear: 131 mm
Length of luggage carrier clamp: 220 mm
Matching luggage bags as well as an alternative luggage carrier can be found in the accessories section.
A quality product made in Italy.
| Color | Chrome |
| Manufacturer | Made in Italy |
| Mounting type | Screws, Nuts & bolts |
| Hole spacing | 60 mm, 131 mm |
| Ø mounting hole | 6.5 mm, 9 mm |
| Material | Steel |
| Surface | chrome-plated |
| Total length | 500 mm |
| Width | 165 mm |
| Height | 100 mm |
| Number of fixing points | 4 pcs |
| Piaggio | Ciao - P |
Ratings
Accessories & related products
Luggage carrier Classic Chrome | Piaggio Ciao P
Width: 140 mm · Manufacturer: Made in Italy · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 575 mm · Height: 100 mm · Mounting type: Nuts & bolts · Mounting type: Screws · Number of fixing points: 4 pcs · Ø mounting hole: 6.5 mm · Hole spacing: 85 mm · Hole spacing: 135 mm · Piaggio OEM number: 114151
EUR 130.40
Explore categories from Luggage carrier & trailer coupling
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Color: silver · Manufacturer: GPO · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm · Material: Chrome steel (colloquially known as stainless steel) · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Number of fixing points: 2 pcs
EUR 12.90
Not so nice 
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Color: black · Material: Steel · Surface: varnished · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
EUR 23.60
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Color: black · Manufacturer: Dell'Orto · Mounting type: Plug connection clamped · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Total length: 82 mm · Ø Output inside: 16 mm · Width: 72 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Height: 111 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 82 · Area of application: Tuning
EUR 82.90
Oil seal NBR 20/30/5 A Gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Width: 5 mm · Ø inside: 20 mm · Ø outside: 30 mm
EUR 7.00
swiing® revival screw set galvanized fan cover | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Screw head: Panhead · Thread type: M5x0.8 (standard thread) · Number of components: 8 pcs
EUR 5.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
