39.0 mm piston with two 2 mm rectangular piston rings with flank lock (FS) suitable for Sachs 502, 50/2, 503 2AL, AAL, 2BL, ABL CH.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the images.
The piston kit is used for bored and honed cylinders.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer Meteor.
Details
| Manufacturer | Meteor |
| Ø outside piston (A) | 38.95 mm |
| Ø piston pin (B) | 12 mm |
| Compression height (C) | 28 mm |
| Curvature (D) | 3 mm |
| Total piston height (E) | 53 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 39 mm |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 2 mm |
| Piston weight | 88 g |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
EUR 23.20
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -30 - 220 °C
EUR 11.50
EUR 25.56/l
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Ø inside: 7.8 mm · Ø inside: 41 mm · Carburetor type: SRE · Ø outside: 12.2 mm · Ø outside: 45 mm · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 5.70
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Ø inside: 3 mm · Filter type: Plastic net · Total length: 23.4 mm · Total length: 50 mm · demountable: No · Ø outside: 20 mm · Color: transparent · Color: white · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm
EUR 6.75
Gearbox cover gasket manual transmission | Sachs 50/2, 50/3, 50/4 A1827 0.4 mm (1A quality)
Material: Sealing paper · Total length: 215 mm · Thickness: 0.4 mm · Color: sand-colored · Width: 130 mm · Number of fixing points: 5 pcs · Number of components: 1 pcs · Pony OEM number: A1827 · Sachs OEM no.: 0250 087 100
EUR 4.45
GPO honing tool 3-arm Ø 32 - 90 mm
Drive shank Drill chuck: hexagonal · Brush head length: 50 mm · Manufacturer: GPO · Material: Silicon carbide · Material: Steel · Area of application: Workshop accessories · Diameter: 32 - 90 mm · Number of components: 1 pcs · Total length: 220 mm · Surface: blank
EUR 38.30
Shaft seal set 3 & 4-speed kickstarter | Sachs
Ø inside: 10 mm · Ø inside: 13.8 mm · Ø inside: 14.96 mm · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 16 mm · Ø outside: 19 mm · Ø outside: 24 mm · Ø outside: 30 mm · Ø outside: 31.5 mm · Width: 2.5 mm · Width: 3.5 mm · Width: 4 mm · Width: 4.5 mm · Width: 7 mm
EUR 38.30
Collection only possible with online purchase and appointment.
