High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
| Width | 108 mm |
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Color | black |
| Thread type | M5x0.8 (standard thread) |
| Height | 11 mm |
| Total length | 175 mm |
| Ø mounting hole | 6 mm |
| Thread length | 6 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 9 pcs, 2 pcs |
| Hole spacing | 50 mm |
Accessories & related products
Plastic license plate holder (CH version)
Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Thread type: M5x0.8 (standard thread) · Height: 11 mm · Width: 108 mm · Total length: 175 mm · Mounting type: Nuts & bolts · Hole spacing: 50 mm · Ø mounting hole: 6 mm · Number of fixing points: 9 pcs · Thread length: 6 mm
EUR 9.40
Serrated lock washer M4 - M12 galvanized
Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
EUR 0.35
Screw M8x16 cylinder head low hexagon socket, galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: Hexagon socket · Screw head: Cylinder head · Width across flats: 5 mm · Thread length: 16 mm · Strength class: 8.8
EUR 1.65
M6x22 hexagon head screw, galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats: 10 mm · Total length: 26 mm · Thread length: 22 mm · Strength class: 8.8 · Color: silver · Number of components: 1 pcs
EUR 1.30
Screw M5x12 pan-head cross galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Nominal diameter (thread): 5 mm · Drive: Cross recess · Screw head: Lens head · Ø External head: 10 mm · Shank: No · Total length: 16 mm · Thread length: 12 mm · Strength class: 4.8
EUR 1.20
Screw M5x10 pan-head hexagon socket, galvanized
Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Drive: Hexagon socket · Total length: 13 mm · Screw head: Lens head · Thread type: M5x0.8 (standard thread) · Ø External head: 9.5 mm · Width across flats: 3 mm · Thread length: 10 mm · Shank: No · Strength class: 10.9
EUR 1.05
Explore categories from Number holder
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.35
Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Wheel size: 16 - 17 " · Wheel size: 17 " · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Valve type: TR4 Auto valve · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Alternative version of the Puch OEM number: 567.060700 · Alternative version of the Puch OEM number: 901.0863 · Alternative version of the Puch OEM number: 902.0853
EUR 12.50
Hot
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
EUR 23.60
Working late? Evening hours on Thursday until 20:00
