"Tuning Set" additional weight set compatible with your MVT or AKOA Racing internal rotor ignition system on a moped, scooter, or small motorcycle.
The various weight plates allow you to precisely tune the flywheel mass of your electronic internal rotor ignition system to your engine’s setup. The additional weight promotes smoother, more consistent engine operation when stationary and can make starting easier. Depending on the ignition settings and the selected combination of flywheels, the additional flywheel mass can positively influence torque characteristics. The tuning remains individual, as every engine and every vehicle is built and tuned differently. Up to three weight plates can be mounted on the mount, depending on the weight and thickness of the selected plate.
Package Contents:
• 1
mounting sprocket• 2 flywheels (20 g each
)• 1 flywheel (30 g)
• 1 x 130
g flywheel• 1 x 170 g flywheel•
2 x M6 x 12 mm countersunk head screws for mounting the mounting pinion•
2 M5 x 8 mm pan-head screws for securing the weights•
2 M5 x 12 mm pan-head screws for securing the weights
Notes:
Not compatible with the MVT Integral ignition system.
Compatible with vehicles equipped with an AKOA Racing or MVT internal rotor ignition system without a fan disc.
The recoil starter can no longer be used after installation.
Brand-name product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Ø outside | 90 mm, 64.8 mm |
| Ø bolt circle | 24.5 mm |
| Weight | 475 g |
| Ø mounting hole | 6.7 mm |
| Area of application | Racing, Tuning |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Direction of rotation: left · Ø mounting plate: 96 mm · Mounting type: Screws · Tension: 12 V · Ø Flywheel outside: 49.2 mm · Number of fixing points: 2 pcs · Ø cable: 7 mm · Performance: 65 W · Weight: 268 g
EUR 433.00
Moped fans also bought
Hot 
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Standard · Total length: 135 mm · Width: 125 mm · Ø cylinder: 38 mm · Height: 55 mm · Number of fixing points: 4 pcs · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44
EUR 39.00
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder
EUR 2.85
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
EUR 2.35
MMB Speedometer 60 km/h, Ø 48 mm (black dial) NOS
Manufacturer: MMB Instrumente · Material: Metal · Material: Plastic · Surface: chrome-plated · Maximum speed: 60 Km/h · Lighting: Light slit · Signal type Tacho: analog · 4-edge speedometer cable: 1.8 mm · Ø outside: 50.4 mm · Thread type: MF10x1 (fine pitch thread) · Ø Receptacle: 48 mm · Color: Chrome · Color: black · Color: red · Color: white · Total height: 70 mm · Depth: 50 mm
EUR 71.10
IMCA shock absorber 30 cm oldschool chrome / silver
Ø outside: 40 mm · Manufacturer: IMCA · Hole spacing: 300 mm · Material: Aluminum · Material: Steel · Color: Chrome · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø spars: 28 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Total length: 330 mm · Mounting type: Nuts & bolts
EUR 91.30
Working late? Evening hours on Thursday until 20:00
