
10 kΩ interference-suppressed spark plug connector for your moped, scooter, and small motorcycle.
The resistor in the spark plug cap prevents magnetic interference with the ignition system and is especially recommended when using an electronic ignition system (HPI, PVL, Selettra, VEC, etc.).
Since the spark plug connector features a 6 mm SAE clamp mount, the end cap remains attached to the spark plug.
You can find spark plugs (non-shielded) compatible with this spark plug holder, ignition wires, and alternative spark plug connectors in the accessories section.
A quality product from the Japanese manufacturer NGK.
| Ø cable | 5 mm, 7 mm |
| Manufacturer | NGK |
| Material | Plastic, Rubber |
| Spark plug socket | SAE |
| Cable available | No |
| Suppressed | Yes |
| Resistance | 10000 Ω |
| Subcategory | Spark plug connector |
| Color | black |
Accessories & related products
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Color: silver · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 11.80
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nipple shape: Cylinder · Number of components: 1 pcs
EUR 2.85
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Total length: 77 mm · Height: 48 mm · Manufacturer: VEC · Area of application: Original · Area of application: Performance · Area of application: Standard · Color: black · Ø Internal flywheel: 90 mm · Ø cable holder: 5 mm · Place of use: Internal (in the ignition) · Cable length: 140 mm · Cable length: 420 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing: 54 mm · Ø mounting hole: 4.6 mm
EUR 177.90
Not in stock
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Material: Steel · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Height: 8.9 mm · Nominal diameter (thread): 10 mm · Ø outside: 18.8 mm · Drive: External hexagon · Surface: galvanized (blue) · Width across flats: 14 mm · Area of application: Standard · Pony OEM number: A4513 · Sachs OEM no.: 0942 072 102
EUR 2.85



