
Removed spark plug cap in sporty blue for your moped, moped and small motorcycle.
The resistor in the spark plug cap prevents magnetic interference with the ignition and is particularly recommended when using an electronic ignition system (HPI, PVL, Selettra, VEC, etc.).
The copper terminal is placed over the ignition cable and then pushed into the plug.
The copper terminal is placed over the ignition cable and then pushed into the plug. As the ignition plug has a 6 mm SAE clamping receptacle, the end cap remains mounted on the ignition plug.
| Manufacturer | NGK |
| Material | Silicone |
| Ø cable | 7 mm |
| Color | blue |
| Spark plug socket | SAE |
| Cable available | No |
| Suppressed | Yes |
| Resistance | 5 Ω |
| Subcategory | Spark plug connector |
Accessories & related products
GPO 6V ignition coil | Hercules Prima, Optima
Place of use: External (outside the ignition) · Manufacturer: GPO · Ø cable holder: 7.8 mm · Color: black · Mounting type: Screws · Number of fixing points: 4 pcs · Ø mounting hole: 5.2 mm · Hole spacing: 53 mm · Area of application: Original · Area of application: Standard · BOSCH OEM number: 0212940
EUR 56.80
NGK CR4 Racing ignition cable & plug High End red / 5 kΩ interference suppressed
Manufacturer: NGK · Material: Silicone · Ø cable: 7 mm · Color: red · Spark plug socket: SAE · Cable available: Yes · Suppressed: Yes · Resistance: 5000 Ω · Subcategory: Ignition cable · Subcategory: Spark plug connector · Cable length: 500 mm
EUR 39.00
Moped fans also bought
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.40
Magura set screw M6 x 34 lock nut SW8
Slotted: No · Manufacturer: Magura · Width across flats nut: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Width across flats Screw: 8 mm · Thread type: M6x1 (standard thread) · Thread length: 24 mm · Total length: 34 mm
EUR 2.95
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Nipple length: 10 mm
EUR 2.85
BING O-ring Bing SRE & 85, Ø 20 mm
Place of use: Carburetor · Manufacturer: BING · Material: Rubber · Color: black · Surface: raw · Number of components: 1 pcs · Ø inside: 17.2 mm · Ø outside: 20 mm · Cord thickness: 1.4 mm · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.45






