Racing variator from Pinasco for your Piaggio Ciao, Si, Bravo, Boxer moped / moped with variomatic drive.
This variator impresses with its clean workmanship and, with its optimized roller tracks and pitch angles, ensures constant acceleration and more top speed than the original.
In terms of performance, the three racing variators from Polini, Malossi and Pinasco are closely matched. Even after countless kilometers of testing, we were unable to detect any significant differences.
The scope of delivery includes 6 gram weights. However, we recommend a set with a larger selection of weights (16 x 13 mm) for tuning. With souped-up engines, the belt often tends to slip, which is why we recommend that you also change the counter-pressure spring in the torque converter. This is also included in the scope of delivery.
If you have a Piaggio Ciao, you should also not use the Polini drive belt (item 24013), but the Bosch V-belt (item 29570), as the Polini belt is too narrow at the top.
The parts described above and other parts for your Vario drive can be found in the accessories section.
Quality product from the Italian manufacturer Pinasco.
| Manufacturer | Pinasco |
| Number of weights | 6 pcs |
| Weight Standard weights | 6 g |
| Ø Weights | 16 mm |
| Length Weights | 13 mm |
| Gearbox type | Vario |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Stage6 6.5 - 9.5 g vario weight set Ø 16 x 13 mm
Manufacturer: Stage6 · Number of weights: 24 pcs · Weight Standard weights: 6.5 g · Weight Standard weights: 7.5 g · Weight Standard weights: 8.5 g · Weight Standard weights: 9.5 g · Ø Weights: 16 mm · Length Weights: 13 mm · Gearbox type: Vario
EUR 38.90
Not in stock
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Nipple length: 5 mm
EUR 2.85
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Manufacturer: Magura · Thread type: M4x0.7 (standard thread) · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm
EUR 2.35
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Valve type: TR4 Auto valve · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 11.70
swiing® revival sliding block (for screwing) Magura throttle twist grip
Width: 7.7 mm · Height: 8.8 mm · Manufacturer: swiing® revival parts · Thread type: M4x0.7 (standard thread) · Material: Aluminum · Surface: anodized · Color: black · Drive: Hexagon socket · Total length: 12 mm · Thread length: 8.8 mm
EUR 11.70
GPO 85° carburetor pipe bend brass M6x0.75
Height: 30 mm · Ø outside: 6 mm · Manufacturer: GPO · Width across flats nut: 8 mm · Thread type: MF6x0.75 (fine pitch thread) · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 85 ° · Internal thread: M5x0.8 (standard thread) · Total length: 45.5 mm · Total length: 53.5 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 6.95
swiing® revival locking plate nut Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Ø inside: 8.15 mm · Ø outside: 33.5 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Area of application: Original · Area of application: Standard · Surface: blank · Number of lobes: 1 pcs
EUR 4.05
Collection only possible with online purchase and appointment.
