Special saddle in a low design and deep sissy bar for your moped, moped and small motorcycle.
Chopper seat with Puch print. The moped seat is not sprung. The saddle holder is in the front part, so the seat slides far back.
The raised upholstery and the attached backrest ensure a very comfortable seat.
Width: 25 cm
Length: 30 cm
Height (padding): approx. 6 cm
Total height of padding: 18 cm
Total height with backrest: 28 cm
Figure 5 is only intended to illustrate the assembled saddle.
Alternative saddles and other attachments can be found in the accessories section.
A quality product made in Portugal.
| Color | black |
| Total length | 300 mm |
| Width | 250 mm |
| Height | 280 mm |
| Manufacturer | Made in Portugal |
| Material | Imitation leather |
| Lettering | Yes |
| Puch |
Ratings
Accessories & related products
Denfeld saddle black NOS
Manufacturer: Denfeld · Material: Plastic · Material: Steel · Ø Saddle tube holder: 22 mm · Surface: galvanized (blue) · Color: black · Spring-loaded: Yes · Total length: 280 mm · Lettering: No · Width: 280 mm · Height: 20 mm · Height: 120 mm · Number of fixing points: 1 pcs · Material thickness: 2 mm · Material thickness: 4 mm
EUR 355.80
Saddle suspension low version black
Manufacturer: Made in Portugal · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Surface: powder-coated · Color: black · Spring-loaded: Yes · Lettering: No · Width: 90 mm · Width: 245 mm · Height: 165 mm · Total length: 300 mm · Number of fixing points: 1 pcs
EUR 59.20
66HEROES Saddle leather barrel springs black
Manufacturer: 66HEROES · Ø Saddle tube holder: 22 mm · Material: Leather · Material: Steel · Surface: chrome-plated · Color: black · Spring-loaded: Yes · Lettering: Yes · Total length: 270 mm · Width: 210 mm · Height: 80 mm · Number of fixing points: 1 pcs
EUR 106.70
Explore categories from Saddle
Moped fans also bought
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats Screw: 19 mm · Number of components: 1 pcs · Strength class: 8.8
EUR 11.80
Not in stock
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Number of components: 10 pcs · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
EUR 23.60
BING 15 mm Bing original carburetor (1/15/46A)
Nominal diameter: 15 mm · Manufacturer: BING · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 82 · Area of application: Standard · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 157.70
Karcoma fuel tap M16x1 vertical | Puch X30 Velux
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Thread type: MF16x1 (fine pitch thread) · Outlet direction: any · Mounting type: Union nut · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
EUR 35.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
