Spring plate suitable for your moped / moped with Z50 2-speed manual engine, which was installed on Puch X30 Velux and Puch X30 NS/NL, among others.
The plate is for the conventional models with clutches with two plates.

Height: 13 mm
Ø outer: 29.85 mm
Ø collar: 45 mm
Ø inner: 26 mm
Material: steel

You can find corresponding clutch plates and complete clutches in the accessories section.

Original spare part number: 050.1207

Details

Material	Steel
Area of application	Standard
Ø outside	29.85 mm, 45 mm
Color	gray
Ø inside	26 mm
Height	13 mm

Suitable for the following models

Puch

Z50 (X30 Sport)

Z50 (X30 Velux)

2-speed MS, MV, MV50

Accessories & related products

swiing® revival gearbox cover gasket (old model) | Puch Z50 engine

For: Puch

10199

swiing® revival gearbox cover gasket (old model) | Puch Z50 engine

Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Thickness: 0.35 mm · Number of fixing points: 8 pcs · Total length: 166 mm · Width: 155 mm · Color: sand-colored

EUR 4.60

For: Puch

11539

Clutch basket Z50 19 teeth | Puch X30

Material: Steel · Toothing type: helical toothed · Number of teeth: 19 pcs · Area of application: Standard

EUR 141.10

Not in stock

For: Puch

22809

Surflex clutch plate set | Puch Z50

Manufacturer: Surflex · Material: Composite materials · Material: Steel · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 2.75 mm · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Area of application: Original

EUR 41.10

Not in stock

swiing® ingenious clutch spring reinforced +20% (Version 2.0) | Puch Z50

For: Puch

24033

swiing® ingenious clutch spring reinforced +20% (Version 2.0) | Puch Z50

Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 30 mm · Ø outside: 39 mm · Total length: 20.5 mm · Color: blue · Ø wire: 4.6 mm · Area of application: Tuning · Number of components: 1 pcs

EUR 28.00

Set

swiing® revival clutch set reinforced | Puch Z50

For: Puch

24035

swiing® revival clutch set reinforced | Puch Z50

Manufacturer: swiing® revival parts · Ø inside: 51 mm · Ø outside: 70 mm · Ø outside: 75 mm · Thickness: 2.5 mm · Number of springs: 1 pcs · Number of slats: 2 pcs

EUR 132.90

Not in stock

swiing® revival clutch & intermediate plate set (2 pcs.) | Puch Z50

For: Puch

24082

swiing® revival clutch & intermediate plate set (2 pcs.) | Puch Z50

Manufacturer: swiing® revival parts · Ø inside: 46 mm · Ø inside: 51 mm · Ø outside: 70 mm · Ø outside: 75 mm · Thickness: 1.5 mm · Thickness: 2.5 mm · Number of slats: 2 pcs

EUR 39.90

Not in stock

Hot

swiing® revival drawbar 2-slats High End | Puch Z50

For: Puch

24299

swiing® revival drawbar 2-slats High End | Puch Z50

Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: blackened · Ø outside: 44.8 mm · Total length: 35 mm · Color: black · Color: red · Area of application: High End

EUR 64.60

swiing® ingenious assembly tool clutch spring | Puch Z50

For: Puch

26361

swiing® ingenious assembly tool clutch spring | Puch Z50

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Width: 96 mm · Total length: 130 mm · Thickness: 6 mm · Area of application: Special tool · Number of components: 9 pcs · Thread type: M6x1 (standard thread)

EUR 48.50

Moped fans like you also bought:

swiing® revival plain bearing clutch basket | Puch Z50

For: Puch

10235

swiing® revival plain bearing clutch basket | Puch Z50

Ø inside: 15 mm · Nominal diameter inside: 15 mm · Ø outside: 17 mm · Total height: 16.2 mm · Manufacturer: swiing® revival parts · Material: special bearing bronze

EUR 12.80

swiing® revival thrust washer 15/26/1 clutch | Puch Z50

For: Puch

10246

swiing® revival thrust washer 15/26/1 clutch | Puch Z50

Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 1 mm · Ø inside: 15 mm · Ø outside: 26 mm

EUR 9.30

swiing® ingenious torsion spring clutch lever reinforced +20% | Z50

For: Puch

10389

swiing® ingenious torsion spring clutch lever reinforced +20% | Z50

Spring design: Torsion spring · Manufacturer: swiing® ingenious parts

EUR 10.50

For: Puch

11421

Seegerring spring basket Z50 clutch

Fuse type: Inside · Nominal diameter: 45 mm · Place of use: Clutch · Manufacturer: Puch · Material: Spring steel

EUR 2.95

swiing® revival intermediate slat | Puch Z50

For: Puch

12251

swiing® revival intermediate slat | Puch Z50

Manufacturer: swiing® revival parts · Material: Steel · Ø inside: 46 mm · Ø inside: 51 mm · Ø outside: 70 mm · Thickness: 1.5 mm

EUR 11.70

Not in stock

swiing® revival thrust washer 15/22/1.5 clutch | Puch E50, Z50

For: Puch

15230

swiing® revival thrust washer 15/22/1.5 clutch | Puch E50, Z50

Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 15 mm · Ø outside: 22 mm · Thickness: 1.5 mm

EUR 8.10

swiing® revival thrust washer 15/22/1.3 clutch | Puch E50, Z50

For: Puch

15685

swiing® revival thrust washer 15/22/1.3 clutch | Puch E50, Z50

Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 15 mm · Ø outside: 22 mm · Thickness: 1.3 mm

EUR 8.10

swiing® revival spring basket | Puch Z50

For: Puch

18710

swiing® revival spring basket | Puch Z50

Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Color: red · Ø inside: 24.3 mm · Ø outside: 62 mm · Height: 26 mm · Area of application: Standard · Puch OEM number: 050.1205

EUR 41.10

swiing® revival thrust washer 15/22/1.1 clutch | Puch E50, Z50

For: Puch

20200

swiing® revival thrust washer 15/22/1.1 clutch | Puch E50, Z50

Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 15 mm · Ø outside: 21.9 mm · Thickness: 1.1 mm

EUR 8.10

swiing® revival decoupling shaft | Puch Z50 engine

For: Puch

20319

swiing® revival decoupling shaft | Puch Z50 engine

Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Color: black-matt · Total length: 90.2 mm · Area of application: Original · Ø outside: 8 mm · Ø outside: 10 mm

EUR 35.20

Collection only possible with online purchase and appointment.

Spring plate 2-speed engines 2-slat version | Puch Z50