Set
Hot Hot
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
Carousel Image 5
logo_swiing ingenious parts

For: Sachs

27103

swiing® ingenious 38 mm cylinder kit tuning diaphragm | Sachs 50/2 (CH)

Home
| Motor
| Cylinder
| Cylinder & racing set

Please select a variant

EUR 182.30

Incl. 21% VAT.

38 mm tuning cylinder kit with reed valve inlet suitable for Swiss Sachs 50/2 (colloquially also 502) mopeds / mopeds.

With optimized timing and larger overflow channels, this optically original cylinder helps your oldie to regain its former freshness.

The cylinder kit is characterized by the following attributes:

  • Cast iron cylinder with 38 mm bore 
  • Membrane control
  • Optimized overflow channels 
  • improved control times
  • pore-clean surface

Suitable add-on parts and the more powerful 41 mm tuning cylinder can be found under accessories


Exhaust thread: M35 x 2 mm

Please select in the selection field whether you would like the cylinder kit with or without gasket set.

Exclusive product for the highest demands of the quality brand swiing®.

The set includes the following fixed parts:

swiing® ingenious 38 mm cylinder diaphragm | Sachs 50/2 (CH)

swiing® ingenious 38 mm cylinder diaphragm | Sachs 50/2 (CH)

27101

Hole pattern [mm]: 59 x 40 / 37 x 37 · Inlet window: 58 x 19 · Manufacturer: swiing® ingenious parts · Material: Gray cast iron · Surface: raw · Displacement: 50 ccm · Nominal diameter: 38 mm · Ø cylinder neck: 43.8 mm · Ø outlet inside: 25.8 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 66.5 mm · Outlet type: slanted · Thread outlet: M35x2 (standard thread) · Number of fixing points: 8 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning

Meteor piston 38 mm | Sachs 50/2, 503 (A2772)

For: Sachs

Meteor piston 38 mm | Sachs 50/2, 503 (A2772)

11667

Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Pony OEM number: A2772, A4358 · Sachs OEM no.: 0286 377 010, 0286 378 005 · Piston weight: 79 g

swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)

For: Sachs

swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)

16088

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Diameter: 4.9 mm · Thread type: M5x0.8 (standard thread) · Total length: 23 mm · Thread length: 6 mm, 12 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101, 0640 016 102

Quantity: 2

Details

Nominal diameter38 mm
Manufacturerswiing® ingenious parts, Meteor
MaterialGray cast iron
Surfacesandblasted
Displacement50 ccm
Crankshaft stroke42 mm
Thread inletM5x0.8 (standard thread)
Hole spacing inlet31 mm
Ø piston pin (B)12 mm
Outlet typeUnion nut
Thread outletM35x2 (standard thread)
Number of fixing points4 pcs
Hole pattern [mm]60 x 40 / 37 x 37
CamouflagedYes
Area of applicationTuning

Suitable for the following models

Sachs

502 (Saxonette) - AML

50/2 - ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS)

Accessories & related products

Cylinder head | Sachs 50/2

For: Sachs

11273

Cylinder head | Sachs 50/2

Number of fixing points: 4 pcs · Decompressor: Yes · Pony OEM number: A1069 · Pony OEM number: A1070 · Sachs OEM no.: 0213 104 006 · Sachs OEM no.: 0213 106 000

EUR 55.10

Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
undefined

For: Sachs

11667

Meteor piston 38 mm | Sachs 50/2, 503 (A2772)

Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Piston weight: 79 g · Pony OEM number: A2772 · Pony OEM number: A4358 · Sachs OEM no.: 0286 377 010 · Sachs OEM no.: 0286 378 005

EUR 58.70

Diaphragm insert Sachs 50/2

For: Sachs

11694

Diaphragm insert Sachs 50/2

Material: Brass · Number of flaps: 2 pcs · Membrane material: Spring steel · Hole spacing: 67 mm · Ø mounting hole: 5.2 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Standard · Pony OEM number: A2624 · Sachs OEM no.: 0286 213 010

EUR 34.00

Motorex 2-stroke mixed oil semi-synthetic 1 L (for running in cylinders!)
undefined

Universal

15357

Motorex 2-stroke mixed oil semi-synthetic 1 L (for running in cylinders!)

Manufacturer: Motorex · Oil type: semi-synthetic · Contents [ml]: 1000 ml · Area of application: Standard · Color: green

EUR 23.40

EUR 23.40/l

swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
undefined

For: Sachs

16088

swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Diameter: 4.9 mm · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Thread type: M5x0.8 (standard thread) · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102 · Pony OEM number: A3700

EUR 2.15

Inox
swiing® revival screw set cylinder head Inox | Sachs 503 / 50/2 / 50/3 / 50/4
undefined

For: Sachs

18009

swiing® revival screw set cylinder head Inox | Sachs 503 / 50/2 / 50/3 / 50/4

Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Ø shaft: 5.85 mm · Number of components: 12 pcs · Thread type: M6x1 (standard thread) · Shank length: 8 mm · Drive: External hexagon · Screw head: Hexagon · Area of application: Standard · Shank: Yes · Thread length: 22 mm · Width across flats SW: 10 mm · Total length: 34 mm

EUR 8.70

swiing lifting plate 1 - 4 mm | Sachs 50/2, 502
undefined
angle-right

For: Sachs

20671

swiing lifting plate 1 - 4 mm | Sachs 50/2, 502

Manufacturer: swiing · Material: Aluminum · Place of use: Cylinder base · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 2.5 mm · Thickness: 3 mm · Thickness: 4 mm

EUR 17.50

GPO adjusting nozzle Bing SSB Sachs (1A quality)
undefined

For: Sachs

22405

GPO adjusting nozzle Bing SSB Sachs (1A quality)

Manufacturer: GPO · Component group Carburetor: Spraying · Material: Brass · Surface: blank · Quantity: 1 pcs · Carburetor type: SSB · Nozzle type: Main nozzle · Nozzle thread: MF7x0.75 (fine pitch thread) · Total length: 58 mm · Drive: External hexagon · Width across flats SW: 11 mm

EUR 35.20

Not in stock

swiing® revival gasket set cylinder with head gasket diaphragm version | Sachs 50/2
undefined

For: Sachs

24550

swiing® revival gasket set cylinder with head gasket diaphragm version | Sachs 50/2

Manufacturer: swiing® revival parts · Number of components: 6 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Area of application: Standard

EUR 22.80

Meteor Racing piston 38 mm | Sachs 50/2 & 503
undefined

For: Sachs

25124

Meteor Racing piston 38 mm | Sachs 50/2 & 503

Nominal diameter: 38 mm · Manufacturer: Meteor Racing · Surface: molybdenum-coated · Ø outside piston (A): 37.95 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Piston weight: 79 g

EUR 76.40

swiing® ingenious intermediate flange 12 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
undefined

For: Sachs

26045

swiing® ingenious intermediate flange 12 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Ø inside: 12 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Hole spacing: 31 mm · Hole spacing: 67 mm · Area of application: Standard

EUR 64.60

Set
swiing 41 mm tuning set diaphragm | Sachs 50/2 (CH)
undefined
angle-right

For: Sachs

27105

swiing 41 mm tuning set diaphragm | Sachs 50/2 (CH)

Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing · Manufacturer: swiing® ingenious parts · Manufacturer: swiing® revival parts · Camouflaged: Yes · Area of application: Tuning · Crankshaft stroke: 42 mm · Displacement: 55 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 41 mm · Hole spacing inlet: 31 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 60 x 40 · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Decompressor: No

EUR 764.90

Moped fans like you also bought:

Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
undefined

For: Sachs

11667

Meteor piston 38 mm | Sachs 50/2, 503 (A2772)

Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Piston weight: 79 g · Pony OEM number: A2772 · Pony OEM number: A4358 · Sachs OEM no.: 0286 377 010 · Sachs OEM no.: 0286 378 005

EUR 58.70

Diaphragm insert Sachs 50/2

For: Sachs

11694

Diaphragm insert Sachs 50/2

Material: Brass · Number of flaps: 2 pcs · Membrane material: Spring steel · Hole spacing: 67 mm · Ø mounting hole: 5.2 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Standard · Pony OEM number: A2624 · Sachs OEM no.: 0286 213 010

EUR 34.00

NSK E15 shoulder ball bearing 15/35/8 (A1149)
undefined

For: Sachs

11989

NSK E15 shoulder ball bearing 15/35/8 (A1149)

Bearing cage: Brass cage ball-guided · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Stock number: E15 · Area of application: Standard · Bearing type: Shoulder bearing · Ø inside: 15 mm · Ø outside: 35 mm · Width: 8 mm · Ball bearing closed: No · Sachs OEM no.: 0232 017 006 · Pony OEM number: A1149

EUR 29.30

swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
undefined

For: Sachs

16088

swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Diameter: 4.9 mm · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Thread type: M5x0.8 (standard thread) · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102 · Pony OEM number: A3700

EUR 2.15

Gasket set with shaft seals diaphragm version | Sachs 50/2

For: Sachs

19325

Gasket set with shaft seals diaphragm version | Sachs 50/2

Number of components: 16 pcs · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 · Area of application: Standard · Pony OEM number: A2548 · Sachs OEM no.: 0286 125 021

EUR 47.00

swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
undefined

For: Sachs

21628

swiing® revival shim set | Sachs 503, 502, 50/2, 50/3

Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Nominal diameter inside: 13 mm · Ø outside: 18 mm · Ø outside: 21 mm

EUR 19.90

BING Gasket set Bing SSB Sachs
undefined

For: Universal · Sachs

23691

BING Gasket set Bing SSB Sachs

Manufacturer: BING · Component group Carburetor: Sealing, revising · Carburetor type: SSB

EUR 14.50

swiing® revival gasket set cylinder diaphragm version | Sachs 50/2
undefined

For: Sachs

27095

swiing® revival gasket set cylinder diaphragm version | Sachs 50/2

Manufacturer: swiing® revival parts · Material: Copper · Material: Sealing paper · Area of application: Standard · Hole spacing inlet: 31 mm · Ø cylinder: 38 mm · Hole spacing inlet: 67 - 31 mm · Ø outlet inside: 28 mm · Hole pattern [mm]: 60 x 40 mm · Number of components: 5 pcs

EUR 15.50

excitement
  • Youtube
  • Facebook
  • Instagram
excitement-mobile
PrepaymentInvoiceVisaMastercardPostFinancePayPalTWINTKlarna