Complete 28 mm cigar exhaust set suitable for your Puch Supermaxi LG1, LG2 moped / moped
.The mounting flange of the flame tube is angled so that it fits the narrow exhaust of the Puch Supermaxi mopeds. The silencer is attached to the frame using the welded-on bracket.
Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Total length: 730 mm · Ø Internal connection: 28 mm · Exhaust type: Cigar
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 25.5 mm · Ø outside: 28 mm · Total length: 300 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 40 mm
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Thickness: 3 mm · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø Internal connection | 28 mm |
| Ø outside | 70 mm |
| Mounting type | Welded lug |
| Exhaust type | Cigar |
| Number of fixing points | 1 pcs |
| Flame tube attachment | Flange |
| Puch | E50 ZA50 (air-cooled) |
Ratings
Accessories & related products
Hot 
swiing® ingenious exhaust clamp 28 mm heat-resistant
Surface: chrome-plated · Color: Chrome · Total length: 40 mm · Width: 40 mm · Manufacturer: swiing® ingenious parts · Ø inside: 25 - 28 mm · Mounting type: Nuts & bolts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel
EUR 26.00
Explore categories from Exhaust system
Moped fans also bought
Handlebar fork plate 35 cm curved with chrome strut
Surface: chrome-plated · Color: Chrome · Width: 720 mm · Height: 350 mm · Manufacturer: Made in Germany · Ø outside: 22 mm · Mounting type: Fork plate · Material: Steel · Fork plate holder length: 90 mm · Clamping diameter: 22 mm · Length handlebar ends: 150 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 260 mm
EUR 39.80
Hot
swiing® revival side protection screw set black | Puch Maxi S
Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.30
swiing® ingenious gasket outlet 28 mm graphite
Place of use: Exhaust · Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Ø inside: 27.4 mm · Area of application: Tuning · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
EUR 8.80
swiing® ingenious exhaust manifold 28 mm chrome | Puch Supermaxi LG1, LG2
Total length: 300 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 25.5 mm · Ø outside: 28 mm · Color: Chrome · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 40 mm
EUR 47.30
Hot
swiing® ingenious exhaust clamp 28 mm heat-resistant
Surface: chrome-plated · Color: Chrome · Total length: 40 mm · Width: 40 mm · Manufacturer: swiing® ingenious parts · Ø inside: 25 - 28 mm · Mounting type: Nuts & bolts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel
EUR 26.00
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
