Pin ring for various crankshafts of mopeds / mopeds without sliding bushes / connecting rod bushes such as Sachs 503, Beta 521, Sachs 504, Puch Maxi S/N, Puch X30 NS/NL, Puch Supermaxi LG1/LG2, Zündapp Belmondo etc.
The rollers are embedded in a silver bearing race. The silver-plated bearing housing has the following advantages:
- Ölfilm adheres better to the surface
- Better heat dissipation
- Lower wear properties
Mass:
- Ø inner: 12 mm
- Ø outer: 15 mm
- Width: 14.2 mm
Note: For crankshafts where a connecting rod bushing is originally installed, a needle roller bearing cannot be used retroactively.
Exclusive product for the highest demands of the quality brand swiing®.
| Bearing cage | Silver cage |
| Width | 14.2 mm |
| Manufacturer | swiing® ingenious parts |
| Bearing type | Needle roller and cage assembly |
| Ø inside | 12 mm |
| Ø outside | 15 mm |
| Dimension needle bearing | 12/15 x 14.2 |
| Alternative version of the Pony OEM number | A4222 |
| Alternative version of the Sachs OEM number | 0232 157 001 |
| Tomos OEM number | 035548 |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) 50/2 50/3 50/4 503 504 (without pedal shaft) 505 (with pedal shaft) 508 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Solex | |
| Tomos | |
| Bye Bike | |
| Alpa Chopper / Turbo |
| Cilo | |
| DKW | |
| Fantic | Issimo |
| Garelli | |
| Honda | |
| ILO / JLO | |
| Kreidler | Flory MF Foil |
| Malaguti | |
| MBK | |
| Miele | |
| Monark | |
| Peugeot | |
| Victoria | |
| Yamaha | |
| Zündapp | 434 Chassis (mountaineer) 278 Motor |
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Surface: galvanized (blue) · Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 3.30
swiing® revival stud bolt set M6 x 106 mm | Puch
Surface: galvanized (blue) · Width across flats SW: 10 mm · Manufacturer: swiing® revival parts · Diameter: 5.9 mm · Material: Steel · Drive: External hexagon · Total length: 106 mm · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.75
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Width: 125 mm · Height: 55 mm · Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 50.70
Hot 
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Width: 50 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nozzle size: 62 · Total length: 66 mm · Ø fuel hose connection: 6 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 94.40
Collection only possible with online purchase and appointment.
