Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Surface | polished |
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Color | Chrome |
| Wheel size | 17 " |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Scope | 1006 mm |
| Mounting type | Nuts & bolts |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Color: silver · Manufacturer: GPO · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Width: 105 mm · Height: 5.3 mm · Ø mounting hole: 5 mm · Thread length: 8 mm · Total length: 145 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts
EUR 12.90
swiing® revival 17" front fender "Retro" Inox
Color: Chrome · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Mounting type: Nuts & bolts
EUR 71.10
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Hole spacing: 19 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Material: Steel · Surface: chrome-plated · Wheel size: 17 " · Distance mudguard - center hole: 315 mm · Wide intake: 65 mm · Color: Chrome · Mounting type: Nuts & bolts · Total length: 325 mm · Number of fixing points: 5 pcs
EUR 15.30
Mudguard strut 16" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Wheel size: 16 " · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Wide intake: 75 mm · Distance mudguard - center hole: 290 mm · Total length: 305 mm · Number of fixing points: 5 pcs · Mounting type: Nuts & bolts
EUR 21.20
GPO license plate holder Inox black (CH version)
Width: 105 mm · Manufacturer: GPO · Ø mounting hole: 5 mm · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Color: black-matt · Thread type: M5x0.8 (standard thread) · Total length: 147 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Height: 6 mm
EUR 15.30
Explore categories from Mudguard
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Color: silver · Manufacturer: GPO · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Width: 105 mm · Height: 5.3 mm · Ø mounting hole: 5 mm · Thread length: 8 mm · Total length: 145 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts
EUR 12.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Material: Brass · Manufacturer: Magura · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.35
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 13.70
EUR 30.44/l
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm
EUR 22.40
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Nipple shape: Pears · Cable length: 2250 mm · Number of components: 1 pcs · Area of application: Standard · Piaggio OEM number: 270460
EUR 2.85
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Ø inside: 2.5 mm · Coating: none · Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Area of application: Standard · Material: Plastic · Material: Steel · Ø cable: 2.2 mm · Ø outside: 5 mm · Color: black · Total length: 6000 mm
EUR 14.10
EUR 2.35/m
Hot
Manual indoor cable set
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 2200 mm
EUR 11.80
ESJOT Gear Ring, 37 Teeth, Reverse, Galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Color: silver · Manufacturer: ESJOT · Ø inside: 94 mm · Material: Steel · Surface: galvanized (blue) · Ø mounting hole: 6.5 mm · Number of teeth: 37 pcs · Thickness: 4.1 mm · Number of fixing points: 4 pcs · Hole spacing: 74 mm · Ø bolt circle: 105.5 mm
EUR 56.80
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Area of application: Tuning · Color: black · Mounting type: Plug connection clamped · Filter type: Racing screen · Width: 68 mm · Total length: 165 mm · Ø Internal connection: 20 mm · Height: 52 mm
EUR 71.10
swiing® revival 17" front fender "Retro" Inox
Color: Chrome · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Mounting type: Nuts & bolts
EUR 71.10
Working late? Evening hours on Thursday until 20:00
