High-quality flange gasket consisting of 2 oil paper gaskets and a spacer made of temperature-resistant plastic for camouflaging the 17 mm intake manifold of your Puch Maxi S/N with E50 as well as Puch X30 moped / moped with Z50 engine.
The 4 mm special gasket with square inlet prevents excessive heating of the intake tract, which could have a negative effect on the air-fuel mixture. Excessively high temperatures in the intake tract can reduce the air density and thus reduce the efficiency of the combustion process.
The intake gasket can also be used if the carburettor needs to be raised.
You can find more intake gaskets, intake manifolds and carburetors in the accessories section.
Excellent product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Oiled paper, Phenolic resin (known as Bakelite®) |
| Nominal diameter | 17 mm |
| Ø inside | 17 mm |
| Thickness | 4 mm |
| Hole spacing inlet | 38 mm |
| Ø screw holder | 6.2 mm |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Hot 
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 17 mm · Width: 47 mm · Choke control: Hand choke · Carburetor type: SRE · Height: 89 mm · Height: 109 mm · Total length: 65 mm · Ø fuel hose connection: 5 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 142.30
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Total height: 53.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Hole spacing inlet: 38 mm · Ø inside: 17 mm · Total length: 38 mm · Mounting type: Stud bolts & nuts · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Height flange center hole: 42 mm
EUR 53.30
swiing® ingenious intake manifold 17 mm SRF | Puch Z50
Total height: 73 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Hole spacing inlet: 38 mm · Ø inside: 17 mm · Total length: 45 mm · Mounting type: Stud bolts & nuts · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Height flange center hole: 61 mm
EUR 59.20
swiing® ingenious 4 mm intake gasket 15 mm intake manifold square | Puch E50, Z50, ZA50
Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (known as Bakelite®) · Nominal diameter: 15 mm · Thickness: 4 mm · Hole spacing inlet: 38 mm · Ø inside: 15 mm · Place of use: Admission · Ø screw holder: 6.2 mm
EUR 8.90
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Area of application: Standard · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 3.35
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 17 mm · Width: 47 mm · Choke control: Hand choke · Carburetor type: SRE · Height: 89 mm · Height: 109 mm · Total length: 65 mm · Ø fuel hose connection: 5 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 142.30
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Total height: 53.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Hole spacing inlet: 38 mm · Ø inside: 17 mm · Total length: 38 mm · Mounting type: Stud bolts & nuts · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Height flange center hole: 42 mm
EUR 53.30
Collection only possible with online purchase and appointment.
