Brake lever for the front wheel on your Piaggio SI PTT moped / moped.
Brake cam mount: 12.5 x 8.2 mm
Ø bore: 11.2 mm
Crushing: 4 mm
Total length: 72 mm
Material thickness: 4 mm
Material: steel, blue galvanized
Note: The two-sided mount of this brake lever is larger than on all other models of the Piaggio Ciao, Bravo, Boxer and the standard versions of the Piaggio Si Europe and Montecarlo.
Only some late Cilo and Pony Cross models also have the larger mount - here the lever fits, but differs slightly in its curvature.
The corresponding brake cam, brake cable and cable clamps can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Place of use | Brake anchor plate |
| Total length | 72 mm |
| Color | silver |
| Thickness | 4 mm |
| Height | 8 mm |
| Pony / Cilo (Beta 521 & 512) | Pony Cross 521 (frame) |
| Piaggio | Si |
Accessories & related products
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Surface: galvanized (blue) · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Nipple length: 10 mm
EUR 2.85
swiing® revival clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Width across flats SW: 11 mm · Width across flats SW: 14 mm · Total length: 21 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 3 pcs · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M7x1 (standard thread) · Thread length: 9.5 mm · Ø shaft: 10.9 mm · Alternative version of the Piaggio OEM number: 27348
EUR 6.40
swiing® ingenious clamping screw front brake reinforced M8 | Piaggio Ciao, SI, Bravo, Boxer
Width across flats SW: 13 mm · Width across flats SW: 14 mm · Total length: 21 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Number of components: 3 pcs · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 9.5 mm · Ø shaft: 10.9 mm · Alternative version of the Piaggio OEM number: 154533
EUR 8.75
Moped fans like you also bought:
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Surface: galvanized (blue) · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Nipple length: 10 mm
EUR 2.85
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Manufacturer: Magura · Thread type: M4x0.7 (standard thread) · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
EUR 2.35
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Width: 9 mm · Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Ø inside: 11.25 mm · Ø inside: 15 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Total length: 53.5 mm · Ball bearing closed: Yes
EUR 34.90
Clamping screw front brake original | Piaggio Ciao, SI, Bravo, Boxer
Surface: galvanized (blue) · Width across flats SW: 11 mm · Manufacturer: Piaggio · Area of application: Original · Material: Steel · Number of components: 7 pcs · Drive: External hexagon · Total length: 20.5 mm · Screw head: Hexagon · Thread type: M7x1 (standard thread) · Thread length: 13.5 mm · Piaggio OEM number: 154533
EUR 20.00
Collection only possible with online purchase and appointment.
