Chain guard for your Zündapp Belmondo moped / moped.
The steel cover plate has been faithfully reproduced and painted. Thanks to the weld nuts, the plate is ready to install and can be mounted directly to the blower cover with two screws.
Hole spacing: 66 mm
Thread: M4
Thickness: 0.5 mm
Material: steel
Surface: painted
The chain guard plate provides a perfect finish and is a must-have for every original Belmondo restoration.
You can find more add-on parts for your Zündapp in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | varnished |
| Color | silver |
| Total length | 99 mm |
| Height | 137 mm |
| Thread type | M4x0.7 (standard thread) |
| Number of fixing points | 2 pcs |
| Zündapp Belmondo |
Ratings
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Color: gray · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 22.40
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Mounting type: Nuts & bolts · Total length over ends: 595 mm · Scope: 950 mm · Wide mudguard profile: 70 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm · Wheel size: 17 "
EUR 94.70
swiing® revival 17" front fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: partly round · Mounting type: Nuts & bolts · Total length over ends: 525 mm · Scope: 638 mm · Wide mudguard profile: 69 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 157 mm · Wheel size: 17 "
EUR 71.00
swiing® revival rear mudguard strut chrome | Zündapp Belmondo
Total length: 345 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Distance mudguard - center hole: 318 mm · Number of fixing points: 3 pcs · Mounting type: Nuts & bolts · Ø mounting hole: 6.5 mm
EUR 42.50
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Area of application: Standard
EUR 2.85
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 11.70
EUR 26.00/l
swiing® revival nozzle set M4 (76 - 86) Bing 18, Bing 85
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Nozzle size: 54 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86 · Drive: Slot · Nozzle thread: M4x0.7 (standard thread)
EUR 18.80
Transval speedometer drive 17" with grease nipple
Place of use: left · Place of use: right · Manufacturer: Transval · Material: Aluminum · Color: gray · 4-edge speedometer cable: 1.8 mm · Wheel size: 17 " · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Overall width outside: 60 mm · Ø mounting hole: 11 mm · Ø outside: 41 mm · Total height: 52 mm
EUR 35.40
Collection only possible with online purchase and appointment.
