Foot gasket for the original cylinder suitable for Puch X30 Velux mopeds.
This cylinder gasket (cylinder flange gasket) is a perfect fit for original cylinders and of the highest quality.
Thickness of the foot gasket: 0.50 mm
Material: oiled paper
Note: For cylinders with a neck diameter of 43 mm (e.g. 40 or 41 mm cylinder kit in the accessories).e.g. 40 or 41 mm cylinder kit in the accessories), we recommend that you use the gasket with item number 20531.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 320.2.10.013.1
| Manufacturer | swiing® revival parts |
| Material | Oiled paper |
| Place of use | Cylinder base |
| Thickness | 0.5 mm |
| Ø cylinder | 38 mm |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Ratings
Accessories & related products
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Standard · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 10.50
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Tuning · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 10.50
GPO 41 mm cylinder kit fan-cooled 12 mm KoBo | Puch X30 Velux, N-2AH
Nominal diameter: 41 mm · Manufacturer: GPO · Manufacturer: Meteor Racing · Manufacturer: swiing · Material: Gray cast iron · Camouflaged: No · Surface: sandblasted · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 60 ccm · Ø cylinder neck: 43.2 mm · Ø outlet inside: 19.4 mm · Ø Inlet inside: 14.6 mm · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread)
EUR 130.20
GPO tuning set 41 mm | Puch X30 Velux
Manufacturer: GPO · Camouflaged: No · Displacement: 60 ccm · Nominal diameter: 41 mm · Crankshaft stroke: 43 mm · Area of application: Tuning · Outlet type: straight · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing inlet: 32 mm
EUR 515.30
38 mm cylinder kit 12 mm KoBo NOS | Puch X30 Velux
Nominal diameter: 38 mm · Manufacturer: Puch · Material: Gray cast iron · Camouflaged: No · Surface: raw · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Ø cylinder neck: 44.9 mm · Ø outlet inside: 19.4 mm · Ø Inlet inside: 8.2 mm · Hole spacing inlet: 32 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Decompressor: Yes · Area of application: Original
EUR 296.10
Set
Hot 
swiing 40 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Nominal diameter: 40 mm · Manufacturer: swiing · Material: Gray cast iron · Camouflaged: No · Surface: sandblasted · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 55 ccm · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread)
EUR 189.50
Moped fans also bought
Oil seal NBR 17/28/7 AS Pinion shaft | Puch Z50
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Place of use: Pinion shaft · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Ø outside: 28 mm · Area of application: Standard · Width: 7 mm
EUR 5.80
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Place of use: Crankshaft · Ø outside: 35 mm · Width: 7 mm
EUR 9.35
Collection only possible with online purchase and appointment.
