Choke lever for attachment to the throttle twist grip on your moped, moped or small motorcycle.
The decompression grip with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Place of use | right |
| Color | white |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.35
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Surface: burnished · Housing material: Steel · Ø inside: 22 mm · Material lever: Plastic · Total length: 94 mm · Color: black · Thread type: M5x0.8 (standard thread) · Mounting type: Screws · Number of fixing points: 2 pcs
EUR 59.00
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Pony OEM number: P0919
EUR 2.85
Clamps, nipples & set screws set 73 pcs.
Storage method: Plastic box · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Surface: raw · Number of components: 73 pcs · Screw head: Hexagon · Drive: External hexagon · Drive: Knurled screw · Drive: Slot · Dimension storage box: 18.5 x 11.0 x 1.8 cm
EUR 70.80
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Width across flats SW: 7 mm · Thread length: 7 mm · Area of application: Standard
EUR 2.95
Front reinforcement / mudguard arch chrome (cheap)
Surface: chrome-plated · Wide intake: 128 mm · Outer width: 143 mm · Material: Steel · Ø outside: 16 mm · Wheel size [inch]: 17 " · Color: Chrome · Distance mudguard - center hole: 207 mm · Distance mudguard - center hole: 242 mm · Mounting type: Nuts & bolts · Ø mounting hole: 6.2 mm · Hole spacing: 35 mm · Total length: 270 mm · Number of fixing points: 6 pcs
EUR 12.90
Magura set screw M6x34 mm lock nut SW8
Thread type: M6x1 (standard thread) · Slotted: No · Width across flats Screw: 8 mm · Manufacturer: Magura · Width across flats nut: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Thread length: 24 mm · Total length: 34 mm
EUR 2.95
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.35
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Tuning · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 10.50
GPO 41 mm cylinder kit fan-cooled 12 mm KoBo | Puch X30 Velux, N-2AH
Manufacturer: GPO · Manufacturer: Meteor Racing · Manufacturer: swiing · Material: Gray cast iron · Surface: sandblasted · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 41 mm · Ø cylinder neck: 43.2 mm · Ø Inlet inside: 14.6 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 19.4 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 32 mm · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Camouflaged: No
EUR 129.90
Not in stock
Collection only possible with online purchase and appointment.
