Inox
Hot 
Noble stainless steel fuel tank suitable for your Sachs 502 Tour de Suisse moped as well as other vintage mopeds / mopeds.
The entire egg tank is made of 1.2 mm thick stainless steel sheet and is manufactured using laser welding technology. The workmanship impresses with its precision and true-to-original details.
The surface is already polished to a high gloss, but can be further refined as desired. If a scratch does occur, it can be easily polished out.
A real gem - durable, stylish and a perfect fit.
Ø mounting hole: 13 x 7 mm
Hole spacing center / center: 308 mm
Channel width: 54 - 55 mm
Notes:
A slightly discolored weld seam may be visible in the area of the fuel connection. This area was deliberately less polished at the factory so as not to damage the thread. When mounted, the discoloration is barely noticeable due to the tank height and the viewing angle.
Depending on the frame mount, it is recommended to use suitable nylon spacers - especially if the mount is slightly narrower than the tunnel width of the tank.
Matching tank caps, nylon washers, fuel caps and other add-on parts can be found in the accessories section.
Nostalgic product for the highest standards from the quality brand swiing®.
| Total length | 360 mm |
| Width | 150 mm |
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Fuel filler cap | Bayonet 30 mm |
| Fuel tap connection thread | MF12x1 (fine pitch thread) |
| Universal |
| Sachs |
Ratings
Accessories & related products
OMG fuel tap vertical M12x1 (with union nut) outgoing left
Manufacturer: OMG · Possible lever positions: open / closed / reserve · Material lever: Plastic · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: left · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm · Mounting type: Union nut
EUR 17.80
OMG fuel tap vertical M12x1 labeled (with union nut) pointing downwards
Manufacturer: OMG · Possible lever positions: open / closed / reserve · Material lever: Plastic · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: straight · Reserve level: 50 mm · Mounting type: Union nut
EUR 20.10
OMG fuel tap vertical M12x1 labeled (with union nut) outgoing left
Manufacturer: OMG · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: left · Spare tube shape: straight · Mounting type: Union nut · Reserve level: 50 mm
EUR 20.10
Moped fans also bought
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Color: Chrome · Surface: chrome-plated · Thread type: FG14.3 (9/16" 20G) · Crank length (center-center): 156 mm · Total length: 180 mm · Wide intake: 28 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
EUR 89.20
GPO pedal axle with rim 34 teeth chrome | Puch X30 Velux
Chain pitch: 1/2" x 1/8" · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Number of teeth: 34 pcs · Wavelength from wreath: 30 mm · Wavelength from wreath: 167 mm · Ø Outer sprocket: 144 mm · Ø Pedal arm holder: 16 mm · Total length: 200 mm · Crank (wreath): 15 mm
EUR 107.10
Collection only possible with online purchase and appointment.
