
Bearing set and oil seal set for the Puch Maxi 1-speed E50 engine (new model).
This bearing set can be installed in the Puch Maxi S, N, and Supermaxi LG1 with catalytic converter engine, among others.
All ball bearings are from the high-quality NTN brand with standard clearance (not C3).
The shaft seals (commonly known as Simmerrings) are double-lipped.
Note: Suitable for crankshafts that do not have an enlarged oil seal seat on the clutch side and have a bearing with an 11 mm inner ring (as shown in Figure 2).
A nostalgic product from the swiing® brand that meets the highest standards.
| Manufacturer | swiing® revival parts |
| Number of components | 7 pcs |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard · Decompressor: Yes
EUR 11.80
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11.80
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Area of application: Chemistry · Color: gray · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
EUR 23.60
EUR 337.14/l
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202
Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Number of components: 3 pcs
EUR 47.30
Explore categories from Seals & gaskets
Moped fans also bought
GPO 3-Jaw Clutch "Original" | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Ø outside: 93 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
EUR 59.20
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard · Decompressor: Yes
EUR 11.80
swiing® revival oil filler plug with sealing ring | Puch E50
Ø External head: 14 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 14.6 mm · Screw head: Lens head · Thread length: 6 mm · Nominal diameter (thread): 10 mm · Number of components: 2 pcs · Thread type: M10x1.5 (standard thread) · Drive: Slot · Puch OEM number: 364.1.10.660.1
EUR 4.65
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Total length: 106 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11.80






