Rear, black primed steel mudguard for your Piaggio Ciao moped / moped with 16" or 17" rims.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
The mudguard has all the original mounting holes and the channel for the cable routing.
Shape: part-round
Width of mudguard profile (A): 76 mm
Height of mudguard profile (B): 35 mm
Endings: not folded at the front / folded open at the rear
Material: Steel, black primed
Total height from support surface to top edge (C): 159 mm
Total length over ends (D): 510 mm
Circumference (E): 620 mm
The mudguard is only primed, i.e. there may be slight scratches.
Other parts for your wheel fairing, such as paint polish or fastening material, can be found under accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Piaggio spare part number: 576135
| Manufacturer | swiing® revival parts |
| Surface | primed |
| Color | black |
| Material | Steel |
| Mounting type | Nuts & bolts |
| Wheel size [inch] | 16 ", 17 " |
| Folding the ends | not folded, open folded |
| Shape of the mudguard | partly round |
| Total length over ends | 510 mm |
| Scope | 620 mm |
| Wide mudguard profile | 76 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 159 mm |
| Piaggio | Ciao - P, SC, PX, C24 |
Accessories & related products
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Color: silver · Material: Chrome steel (known as Nirosta®) · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Total length: 145 mm · Ø mounting hole: 5 mm · Width: 105 mm · Height: 5.3 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Thread length: 8 mm
EUR 12.90
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.90
EUR 2’590.00/l
swiing® revival rear fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Surface: polished · Color: Chrome · Material: Chrome steel (known as Nirosta®) · Mounting type: Nuts & bolts · Folding the ends: open folded · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 620 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 159 mm · Piaggio OEM number: 576135
EUR 41.30
swiing® revival rear fender Inox black | Piaggio Ciao
Material: Chrome steel (known as Nirosta®) · Surface: varnished · Color: black · Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Folding the ends: not folded · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 620 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 159 mm · Wheel size [inch]: 16 " · Wheel size [inch]: 17 "
EUR 51.90
Taillight | Piaggio Ciao P, SC, Bravo, Boxer BTV2
Manufacturer: Made in Italy · Test mark: none · Bulb holder: BA9s · Color: red · Mounting type: Nuts & bolts · Width: 40 mm · Height: 110 mm · Depth: 75 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Number of fixing points: 2 pcs
EUR 37.70
Set of rear fender mounting screws Inox original | Piaggio Ciao
Manufacturer: Piaggio · Color: black · Material: Chrome steel (known as Nirosta®) · Mounting type: Nuts & bolts · Material: Rubber · Piaggio OEM number: 013092 · Piaggio OEM number: 016406 · Piaggio OEM number: 020106 · Piaggio OEM number: 031092 · Piaggio OEM number: 174968 · Piaggio OEM number: 174969
EUR 29.40
Rear mudguard fixing screw Inox original | Piaggio Ciao
Manufacturer: Piaggio · Material: Chrome steel (known as Nirosta®) · Material: Rubber · Piaggio OEM number: 013092 · Piaggio OEM number: 016406 · Piaggio OEM number: 020106 · Piaggio OEM number: 031092 · Piaggio OEM number: 174968 · Piaggio OEM number: 174969
EUR 8.50
Moped fans also bought
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Test mark: none · Bulb holder: BA9s · Color: black · Color: red · Mounting type: Nuts & bolts · Material: Plastic · Width: 130 mm · Height: 58 mm · Depth: 43 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Number of fixing points: 2 pcs
EUR 22.30
swiing® revival front fender primed | Piaggio Ciao
Manufacturer: swiing® revival parts · Surface: primed · Color: black · Mounting type: Nuts & bolts · Material: Steel · Folding the ends: open folded · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Piaggio OEM number: 274184
EUR 38.90
GPO control bearing set | Piaggio Ciao
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Ø inside: 27 mm · Bearing type: Bearing ring · Ø outside: 41.4 mm · Ø outside: 42 mm · Ø mounting frame: 30.05 mm · Color: silver · Thread type: FG25.4 (1" 24G) · Height: 10.5 mm · Height: 17 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
EUR 22.30
Not in stock
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Quantity: 4 pcs · Color: black · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Total length: 1350 mm · Total length: 1600 mm · Outer shell length: 2000 mm · Total length: 2180 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
EUR 23.50
Collection only possible with online purchase and appointment.
