Silicone tank emblem «Ciao» for your Piaggio Ciao moped / moped.
The sticker has the look of brushed aluminum and the golden yellow border around the lettering adds a visual accent.
The change from the small to the large stickers took place on the Ciao in the middle of the SC model series. As a result, this 115x27 mm sticker fits into all large tank inserts of the SC, PX and C24 models.
From the factory, this 3D sticker was installed in Switzerland on early C24 models from 1998 onwards, and was then replaced by the colored and cut-out «Ciao» 3D sticker on the last models produced before 2006.
Sticker dimensions: 115x27x2 mm
Material: silicone
Durability: petrol resistant
Price per piece.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive.
You will find suitable cleaning cloths and other decals in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 813875
Alternative to the original Piaggio spare part number: 298723, 814489
| Width | 115 mm |
| Manufacturer | Piaggio |
| Material | Silicone |
| Height | 27 mm |
| Rear side texture | Adhesive |
| Thickness | 2 mm |
| Mounting type | glue |
| Piaggio OEM number | 813875 |
| Alternative version of the Piaggio OEM number | 298723, 814489 |
| Piaggio | Ciao - C24 |
Accessories & related products
Tank sticker "PIAGGIO" 3D silicone 115 x 27 mm original | Piaggio Ciao, SI, Bravo
Manufacturer: Piaggio · Material: Silicone · Place of use: Tank (+ frame) · Color: black · Color: silver · Rear side texture: Adhesive · Consistency: petrol resistant · Total length: 115 mm · Transferfolie: No · Width: 27 mm · Height: 1.5 mm · Puch OEM number: 298723
EUR 15.30
Tank sticker "Ciao" 3D silicone 109 x 25 mm original | Piaggio Ciao
Thickness: 1.2 mm · Manufacturer: Piaggio · Material: Silicone · Color: Chrome · Color: orange · Rear side texture: Adhesive · Width: 109 mm · Height: 25 mm · Alternative version of the Piaggio OEM number: 298723 · Alternative version of the Piaggio OEM number: 813875 · Piaggio OEM number: 814489
EUR 16.50
Sticker gel "KAT" left & right side protection | Piaggio Ciao, SI, Grillo
Place of use: Housing cover · Material: Silicone · Color: black · Color: gold · Color: gray · Surface: rubberized · Color: yellow · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Border: contour cut · Transferfolie: No · Width: 155 mm · Height: 22 mm
EUR 25.50
Explore categories from Gasoline & Tank
Moped fans also bought
Handlebar fork plate 24 cm Franz black
Material: Steel · Color: black · Surface: varnished · Clamping diameter: 22 mm · Ø outside: 22 mm · Fork plate holder length: 60 mm · Mounting type: Fork plate · Length handlebar ends: 180 mm · Crossbar: Yes · Ø Strut: 12.5 mm · Width: 450 mm · Strut length: 160 mm · Height: 240 mm
EUR 47.30
Not in stock
Hot 
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Total length: 65 mm · Mixed oil connection: No · Width: 47 mm · Vacuum connection: No · Height: 89 mm · Height: 109 mm · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 142.30
GPO sprocket 35 - 57 teeth black | Puch Maxi S, N / X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Surface: varnished · Number of teeth: 35 pcs · Number of teeth: 36 pcs · Number of teeth: 37 pcs · Number of teeth: 38 pcs · Number of teeth: 39 pcs · Number of teeth: 40 pcs · Number of teeth: 41 pcs · Number of teeth: 42 pcs · Number of teeth: 43 pcs · Number of teeth: 44 pcs · Number of teeth: 45 pcs · Number of teeth: 46 pcs · Number of teeth: 47 pcs · Number of teeth: 48 pcs · Number of teeth: 49 pcs · Number of teeth: 50 pcs · Number of teeth: 51 pcs · Number of teeth: 52 pcs · Number of teeth: 53 pcs · Number of teeth: 54 pcs · Number of teeth: 55 pcs · Number of teeth: 56 pcs · Number of teeth: 57 pcs · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Ø bolt circle: 106 mm · Cranking (offset): 8 mm
EUR 23.60
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 17 mm · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Total height: 53.5 mm · Height flange center hole: 42 mm · Total length: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Camouflaged: Yes
EUR 53.30
Working late? Evening hours on Thursday until 20:00
