
Grey throttle twist grip made of cast aluminum in the old style, suitable for all mopeds / mopeds.
The throttle grip comes very close to the look of the original Magura throttle grip and fits on all handlebars with an outer diameter of 22 mm.
Brake lever, throttle lever and workmanship are of good quality. The simple look of the fitting fits perfectly with all oldie & vintage handlebars.
Ø inside: 22.3 mm
Total length: 129 mm
Length of brake lever: 135 mm
Material: aluminum / cast aluminum
Alternatives to the throttle grip and the matching counterpart for the hand-shifted moped can be found in the accessories section.
| Ø inside | 22.3 mm |
| Material | Cast aluminum, Aluminum, Plastic |
| Housing material | Cast aluminum |
| Surface | powder-coated |
| Material lever | Aluminum |
| Color | gray, silver |
| Brake light switch | No |
| Total length | 129 mm |
| Universal |
| Puch |
| Sachs |
| Pony / Cilo (Beta 521 & 512) |
| Zündapp Belmondo |
Explore categories from Handles & fittings
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard
EUR 2.85
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm
EUR 2.35
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2000 mm · Area of application: Standard
EUR 4.05
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Gearbox type: Foot control · Gearbox type: Manual gearshift · Contents: 450 ml · Area of application: Gearbox lubrication with clutch
EUR 12.90
EUR 28.67/l
Manual indoor cable set
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 2200 mm
EUR 11.80
swiing® revival shift lever 2-speed (Magura replica) silver
Manufacturer: swiing® revival parts · Material: Rubber · Color: gray · Surface: raw · Color: silver · Surface: varnished · Housing material: Aluminum · Material lever: Sheet metal (steel) · Ø inside: 22 mm · Number of gears: 2 pcs · Total length: 145 mm
EUR 166.00
Magura set screw M6x34 mm lock nut SW10
Slotted: No · Manufacturer: Magura · Width across flats nut: 10 mm · Material: Brass · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Width across flats Screw: 8 mm · Thread length: 23 mm · Total length: 34 mm
EUR 2.95
Shift lever 2-speed (Magura replica) gray / gray
Surface: galvanized (blue) · Surface: varnished · Housing material: Aluminum · Material lever: Sheet metal (steel) · Color: gray · Number of gears: 2 pcs · Ø inside: 22 mm · Total length: 150 mm · Sachs OEM no.: 0289 055 000 · Puch OEM number: 320.3.32.004.0 · Magura OEM number: 0129912 · Magura OEM number: 0129918
EUR 82.90
Not in stock











