The world has never seen pedals like these before!
The solid aluminum pedals can be folded in. This saves you a whole 6 cm.
This may not seem like much, but it can be crucial when space is tight or during transportation.
With non-slip tread with cams on both sides.
Thread: 9/16"
Length: 115 mm
Width: 85 mm
Height: 27 mm
The reflectors on the sides contribute to road safety.
We recommend mounting the folding pedals with Loctite threadlocker.
In addition, a flat fork wrench is required for assembly.
Both products can be found in the accessories section below.
Price per pair.
Included in delivery are two additional aluminum washers for spacing.
Quality product from the manufacturer wellgo.
| Manufacturer | wellgo |
| Material | Aluminum, Plastic |
| Surface | coated |
| Color | black |
| Width | 85 mm |
| Height | 27 mm |
| Reflectors | Yes |
| Thread type | FG14.3 (9/16" 20G) |
| Total length | 115 mm |
| Width across flats | 15 mm |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
Moped fans also bought
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Surface: galvanized (blue) · Color: silver · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs · Thread type: M6x1 (standard thread) · Total length: 175 mm
EUR 11.80
EUR 10.60
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.80
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Ø outside: 45 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.35
Hot
swiing® revival side protection screw set black | Puch Maxi S
Drive: Slot · Drive: Triangular head · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Total length: 47 mm · Thread length: 50 mm · Total length: 60 mm
EUR 15.30
Transval speedometer drive 16" bracket with grease nipple
Place of use: left · Place of use: right · Manufacturer: Transval · Material: Aluminum · Color: gray · Wheel size: 16 " · Ø outside: 41 mm · 4-edge speedometer cable: 2.6 mm · Overall width outside: 50 mm · Ø axle: 11 mm · Ø mounting hole: 11 mm · Total height: 52 mm · Thread type: MF10x1 (fine pitch thread)
EUR 33.10
Dell'Orto 12/12 SHA carburetor hand choke | Piaggio Ciao PX, C24
Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: SHA (Piaggio) · Nominal diameter: 12 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 50.6 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 48 · Mounting type: Plug connection clamped · Total length: 55 mm · Width: 60 mm · Height: 110 mm · Area of application: Tuning
EUR 77.00
Not in stock
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
