Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Damping type | Spring |
| Surface | varnished |
| Adjustable | Yes |
| Total length | 290 mm |
| Color | black |
| Ø Fastening inside | 10 mm |
| Ø spars | 28 mm |
| Hole spacing | 260 mm |
| Ø outside | 44 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.00
EUR 2’600.00/l
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Nominal diameter (thread): 8 mm · Screw head: Hexagon
EUR 14.10
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Screw head: Hexagon · Drive: External hexagon
EUR 21.20
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Color: Chrome · Ø spars: 24 mm · Number of fixing points: 2 pcs · Ø outside: 46 mm · Total length: 295 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 260 mm · Mounting type: Nuts & bolts
EUR 59.20
YSS Shock absorber Racing 28 cm (oil pressure)
Color: black · Total length: 310 mm · Manufacturer: YSS · Surface: varnished · Damping type: Hydraulic (oil) · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø spars: 280 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Hole spacing: 280 mm
EUR 166.00
Explore categories from Shock absorber & swingarm
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Ø Bundle: 6 mm · Thread length: 7 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Screw head: Hexagon · Total length: 15 mm · Thread type: M6x1 (standard thread) · Width across flats: 7 mm · Area of application: Standard
EUR 2.95
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Thread length: 12 mm · Diameter: 5.95 mm · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9
EUR 2.15
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
EUR 11.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Thread length: 4 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread type: M4x0.7 (standard thread)
EUR 2.35
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Thread length: 35 mm · Thread length: 50 mm · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread type: M5x0.8 (standard thread)
EUR 15.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
