Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 280 mm
Outer diameter of coil spring: 49 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Ø outside | 49 mm |
| Adjustable | Yes |
| Mounting type | Nuts & bolts |
| Ø spars | 30 mm |
| Ø Fastening inside | 10 mm |
| Hole spacing | 280 mm |
| Number of fixing points | 2 pcs |
| Universal |
| Tomos |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.20
EUR 2’620.00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon
EUR 21.40
MKX shock absorber 28 cm chrome
Number of fixing points: 2 pcs · Manufacturer: MKX · Ø outside: 46 mm · Color: Chrome · Material: Platinum · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Hole spacing: 280 mm · Mounting type: Nuts & bolts
EUR 59.60
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Color: gray · Chain pitch: 1/2" x 3/16" · Ø bore: 4 mm · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø Pin: 3.94 mm
EUR 14.90
Inox
Hot
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.00
Not in stock
Hot
EBR fork reinforced black | Puch
Material: Steel · Color: Chrome · Color: black · Manufacturer: EWC · Surface: chrome-plated · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Thread length: 57 mm · Head tube length: 180 mm · Thread type: MF26x1 (fine pitch thread) · Fork bridge - center wheel axle: 381 mm · Total length: 580 mm · Distance brake cam to wheel axle center-center: 40 mm
EUR 158.80
Handlebar fork plate 40 cm curved with chrome strut
Material: Steel · Color: Chrome · Height: 400 mm · Manufacturer: Made in Germany · Ø outside: 22 mm · Surface: chrome-plated · Width: 730 mm · Clamping diameter: 22 mm · Fork plate holder length: 100 mm · Mounting type: Fork plate · Length handlebar ends: 150 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 320 mm
EUR 42.90
Handlebar fork plate 15 cm cross black
Material: Steel · Surface: varnished · Ø outside: 22 mm · Color: black · Clamping diameter: 22 mm · Fork plate holder length: 100 mm · Width: 710 mm · Height: 150 mm · Mounting type: Fork plate · Length handlebar ends: 150 mm · Crossbar: Yes · Ø Strut: 12.5 mm · Strut length: 230 mm
EUR 29.70
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Height: 13.8 mm · Area of application: Standard · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Drive: External hexagon · Thread type: MF26x1 (fine pitch thread) · Width across flats: 30 mm · Thread depth: 12 mm
EUR 11.80
Collection only possible with online purchase and appointment.
