Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The height or preload of the shock absorbers can be adjusted using the special spring mount.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting in the event of lateral forces.
The scope of delivery includes one pair.
Rear springs from other manufacturers, the matching adjustment key, washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Material | Steel, Aluminum |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 30 mm |
| Hole spacing | 300 mm |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Ø outside | 49 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.90
EUR 2’590.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Material: Steel · Surface: varnished · Color: black · Manufacturer: YSS · Ø outside: 52 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 330 mm · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø spars: 32 mm
EUR 165.40
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Surface: nickel-plated · Material: Brass · Material: Steel · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.35
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Wheel size [inch]: 17 " · Folding the ends: closed folded · Color: Chrome · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
EUR 41.30
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Surface: raw · Color: silver · Material: Plastic · Material: Steel · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.30
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Outer width: 160 mm · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Material: Steel · Wheel size [inch]: 17 " · Distance mudguard - center hole: 300 mm · Ø mounting hole: 12.5 mm · Number of fixing points: 4 pcs · Total length: 305 mm
EUR 17.60
Collection only possible with online purchase and appointment.
